The effect of water/cement (w/c) ratio on the mechanical properties such as compressive
strength and split tensile strength of cement mortar cylinders and cubes was investigated …

This paper presents the development of ambient temperature cured ultra-high-performance
geopolymer concrete (UHPGPC). Ultra-high-performance concrete (UHPC) mixtures were …

Due to the specific gravity of recycled brick aggregate (RBA) is less than that of natural
aggregate (NA), the traditional mix proportion design of concrete can not be used. The …

The subject of the experimental research is concrete with cold-bonded fly ash aggregate
from fly ash of Novosibirskaya GRES Thermal Power Plant (Novosibirsk, Russia). Cold …

Phosphogypsum (PG) is an industrial waste produced during the manufacture of phosphoric
acid. In this study, dihydrate phosphogypsum (DPG), ground granulated blast furnace slag …

Experimental studies of cold-bonded fly ash aggregate revealed that this material is
promising for concrete with a reduced density, about 2000 kg/m 3. The properties of С25/30 …

In this paper, influence water/binder ratio on the hardened state properties of cement mortar
was investigated after 28 days curing period as assigned by ACI Standard. From the results …

The paper presents a brief study of low thermal transmittance concretes with fly ash
aggregate obtained from fly ash of coal-fired thermal power plants. The research analyzes …

In the present contribution, the water‐cement‐density ratio law for the standard curing 28‐
day compressive strength of cement‐based materials including grout, normal concrete …

The effect of expanded polystyrene (EPS) inclusions on thermal conductivity of lightweight
concrete is studied. Various mixtures are produced by incorporating EPS aggregate at …