Evaluation of crystalline volume fraction of laser-annealed polysilicon thin films using raman spectroscopy and spectroscopic ellipsometry

J Pyo, B Lee, HY Ryu - Micromachines, 2021 - mdpi.com
We investigated the crystallinities of poly silicon (poly Si) annealed via green laser
annealing (GLA) with a 532-nm pulsed laser and blue laser annealing (BLA) with 450-nm …

Femtosecond laser induced nanocone structure and simultaneous crystallization of 1.6 µm amorphous silicon thin film for photovoltaic application

L Hong, XC Wang, HY Zheng, L He… - Journal of Physics D …, 2013 - iopscience.iop.org
In this paper, we have demonstrated the crystallization and simultaneous formation of the
nanocone structure on the 1.6 µm thick amorphous silicon (a-Si) film using a one-step …

Picosecond and nanosecond laser annealing and simulation of amorphous silicon thin films for solar cell applications

I Theodorakos, I Zergioti, V Vamvakas… - Journal of Applied …, 2014 - pubs.aip.org
In this work, a picosecond diode pumped solid state laser and a nanosecond Nd: YAG laser
have been used for the annealing and the partial nano-crystallization of an amorphous …

Hyperdoping of silicon films with titanium via nanosecond-laser melting: Structure evolution, impurity distribution, sub-bandgap formation, and doping mechanism

C Wen, ZQ Shi, JX Wang, JL Tang, YB Zhang… - Optics & Laser …, 2022 - Elsevier
Hyperdoping of Si films with Ti was achieved via nanosecond (ns)-laser melting of Si/Ti
composite films under different film deposition and laser treatment conditions. The structural …

[PDF][PDF] Investigation on Laser-annealing and Subsequent Laser-nanotexturing of Amorphous Silicon (a-Si) Films for Photovoltaic Application.

IA Palani, NJ Vasa, M Singaperumal… - Journal of laser micro …, 2010 - academia.edu
Development of textured crystalline silicon from amorphous silicon film using a pulsed Nd3+:
YAG laser is reported. The technique involved is laser annealing and subsequent laser …

Laser assisted wet texturing of flexible polyethylene terephthalate substrate using Nd3+: YAG laser for photovoltaics devices

AK Shukla, K Akash, IA Palani… - Materials Science and …, 2017 - Elsevier
In this research, a successful methodology of laser assisted wet texturing (LAWT) of flexible
polyethylene terephthalate (PET) is demonstrated. The texturing is carried out employing …

Femtosecond laser-induced simultaneous surface texturing and crystallization of a-Si: H thin film: absorption and crystallinity

H Wang, P Kongsuwan, G Satoh, Y Lawrence Yao - 2012 - asmedigitalcollection.asme.org
Hydrogenated amorphous silicon (a-Si: H) thin films have been considered for use in solar
cell applications because of their significantly reduced cost. Their overall efficiency and …

Laser annealing of laser additive–manufactured Ni-Ti structures: An experimental–numerical investigation

S Shiva, IA Palani, CP Paul… - Proceedings of the …, 2018 - journals.sagepub.com
Tailored structures of Ni-Ti shape memory alloys for micro-electro-mechanical systems can
be fabricated using laser additive manufacturing, and requisite homogeneous microstructure …

Crystallization of poly-silicon film by different annealing techniques

N Bidin, SNA Razak - 2011 Saudi International Electronics …, 2011 - ieeexplore.ieee.org
Poly-Silicon is widely used in semiconductor devices especially in TFTs technology.
Performance of silicon thin film depends on the degree of crystallization. Enhancing the …

Influence of laser wavelength and beam profile on Nd3+: YAG laser assisted formation of polycrystalline-Si films

IA Palani, NJ Vasa, M Singaperumal, T Okada - Thin solid films, 2010 - Elsevier
Influence of wavelengths and beam profiles of a pulsed Nd3+: YAG laser on the formation of
a polycrystalline-silicon (poly-Si) on a-Si thin film is investigated. Two sets of samples of …