Investigation of the evolution of retained austenite in Fe–13% Cr–4% Ni martensitic stainless steel during intercritical tempering
S Zhang, P Wang, D Li, Y Li - Materials & Design, 2015 - Elsevier
The microstructure and amount of retained austenite (the austenite remained at room
temperature) evolved in Fe–13% Cr–4% Ni martensitic stainless steel during intercritical …
temperature) evolved in Fe–13% Cr–4% Ni martensitic stainless steel during intercritical …
[HTML][HTML] Microstructure and corrosion performance of high-entropy alloy and austenite and super duplex stainless steels in 3.5% NaCl solution
Stainless steel (STS) has good strength and corrosion resistance. However, it is not suitable
for use in deep water because it is vulnerable to low-temperature brittleness. High-entropy …
for use in deep water because it is vulnerable to low-temperature brittleness. High-entropy …
Effect of post weld heat treatment on weldability of high entropy alloy welds
The effect of post weld heat treatment (PWHT) temperature on laser beam welds in high-
entropy alloys (HEAs) using a cold-rolled cantor system (CoCrFeMnNi) was investigated …
entropy alloys (HEAs) using a cold-rolled cantor system (CoCrFeMnNi) was investigated …
Synergy of strengthening and toughening of a Cu-rich precipitate-strengthened steel
A high strength steel with a combination of∼ 930 MPa yield strength and excellent low
temperature toughness with an upper shelf energy of above 200 J and ductile brittle …
temperature toughness with an upper shelf energy of above 200 J and ductile brittle …
Effects of (W, Cr) carbide on grain refinement and mechanical properties for CoCrFeMnNi high entropy alloys
In this study, we investigated the influence of (W, Cr) carbide on the hardness and tensile
properties of friction stir welds (FSWs) for CoCrFeMnNi high entropy alloys. FSW without …
properties of friction stir welds (FSWs) for CoCrFeMnNi high entropy alloys. FSW without …
Weldability of cast CoCrFeMnNi high-entropy alloys using various filler metals for cryogenic applications
This study investigates the effect of stainless steel (STS) 308 L and high-entropy alloy (HEA)
filler metals on gas tungsten arc (GTA) welding. The weldability of the cast CoCrFeMnNi …
filler metals on gas tungsten arc (GTA) welding. The weldability of the cast CoCrFeMnNi …
Superior-tensile property of CoCrFeMnNi alloys achieved using friction-stir welding for cryogenic applications
The friction-stir weld (FSW) was investigated based on the relationship between
microstructural and mechanical properties at room and cryogenic temperatures for rolled …
microstructural and mechanical properties at room and cryogenic temperatures for rolled …
Tensile and microstructural characteristics of Fe-24Mn steel welds for cryogenic applications
Herein, we investigated the weldability and relationship between microstructure and tensile
properties in 24 wt% Mn steel welds and, specifically, submerged arc welds (SAWs) were …
properties in 24 wt% Mn steel welds and, specifically, submerged arc welds (SAWs) were …
Fatigue crack growth behavior of the simulated HAZ of 800 MPa grade high-performance steel
S Kim, D Kang, TW Kim, J Lee, C Lee - Materials Science and Engineering …, 2011 - Elsevier
The present study focuses on the fatigue properties in the weld heat-affected zone (HAZ) of
800MPa grade high-performance steel, which is commonly used in bridges and buildings …
800MPa grade high-performance steel, which is commonly used in bridges and buildings …
Role of heat inputs on microstructure and mechanical properties in coarse-grained heat-affected zone of bainitic steel
This study aims to find out the effect of welding heat inputs on microstructure and
mechanical properties relationship of naval high strength steel. The physical weld thermal …
mechanical properties relationship of naval high strength steel. The physical weld thermal …