Hydrogel composites with different dimensional nanoparticles for bone regeneration
X Li, Z Yang, L Fang, C Ma, Y Zhao… - Macromolecular …, 2021 - Wiley Online Library
The treatment of large segmental bone defects and complex types of fractures caused by
trauma, inflammation, or tumor resection is still a challenge in the field of orthopedics …
trauma, inflammation, or tumor resection is still a challenge in the field of orthopedics …
A review of the top of the barrier nanotransistor models for semiconductor nanomaterials
The modelling and simulation of low-dimensional nanoelectronic devices is important,
because the semiconductor industry has scaled transistors down to the sub-10 nm regime …
because the semiconductor industry has scaled transistors down to the sub-10 nm regime …
An analytical approach to model capacitance and resistance of capped carbon nanotube single electron transistor
The single electron transistor (SET) as a nanoscale transistor operates according to the
electron tunneling via two tunnel junctions. Since selecting a suitable island material plays a …
electron tunneling via two tunnel junctions. Since selecting a suitable island material plays a …
Graphene nanoribbon conductance model in parabolic band structure
Many experimental measurements have been done on GNR conductance. In this paper,
analytical model of GNR conductance is presented. Moreover, comparison with published …
analytical model of GNR conductance is presented. Moreover, comparison with published …
Modelling of graphene nanoribbon Fermi energy
Graphene nanoribbon (GNR) is a promising alternative to carbon nanotube (CNT) to
overcome the chirality challenge as a nanoscale device channel. Due to the one …
overcome the chirality challenge as a nanoscale device channel. Due to the one …
Design and analysis of a new carbon nanotube full adder cell
MH Ghadiry, A Abd Manaf, MT Ahmadi… - Journal of …, 2011 - Wiley Online Library
A novel full adder circuit is presented. The main aim is to reduce power delay product (PDP)
in the presented full adder cell. A new method is used in order to design a full‐swing full …
in the presented full adder cell. A new method is used in order to design a full‐swing full …
Device modelling and performance analysis of two-dimensional AlSi3 ballistic nanotransistor
Silicene is an emerging two-dimensional (2D) semiconductor material which has been
envisaged to be compatible with conventional silicon technology. This paper presents a …
envisaged to be compatible with conventional silicon technology. This paper presents a …
Analytical assessment of carbon allotropes for gas sensor applications
Feasibility of a gas sensor with NH 3 as a prototype using carbon allotropes (graphene and
CNT) is demonstrated, with graphene displaying superior sensitivity and conductance. Such …
CNT) is demonstrated, with graphene displaying superior sensitivity and conductance. Such …
The high-field drift velocity in degenerately-doped silicon nanowires
The charge transport in nanowires suitable for high-speed applications depends on charge
carrier's mobility and saturation velocity in the conducting channel. It is shown that the high …
carrier's mobility and saturation velocity in the conducting channel. It is shown that the high …
Synthesis of carbon dots (CDs) and determination of optical gap energy with Tauc plot method
J Jumardin, A Maddu, K Santoso… - Jambura Physics …, 2021 - ejurnal.ung.ac.id
Abstract Carbon Dots (CDs) which have been synthesized using the laser ablation method
show the presence of UV-Vis absorption in the wavelength range of 303 nm to 333 nm for …
show the presence of UV-Vis absorption in the wavelength range of 303 nm to 333 nm for …