In addition to oxidation resistance, the improvement of hydrogen embrittlement is also a big
challenge for the noble metal thermal barrier coating. Unfortunately, the hydrogenation …

Plasma carburizing has emerged as a potent technique for improving the wear resistance of
stainless steels, and sustaining or improving corrosion resistance through a suitable choice …

Abstract Ti 3 AlC 2 reinforced Co–based alloy coatings were fabricated on H13 steel using a
laser cladding (LC). The morphologies, chemical elements and phases of obtained coatings …

In this work, Ni60-WC composite coatings with 35 wt% WC (Ni65-WC35), 50 wt% WC (Ni50-
WC50) and 65 wt% WC (Ni35-WC65) were deposited by the extreme-high-speed laser …

Atmospheric plasma sprayed metallic coatings always contain oxides because of the
entrainment of ambient air into plasma jet, which significantly limits their performances and …

This first regional issue published in STMP highlights the potential and importance of the
research carried out in Latin America regarding surface engineering and tribology. In order …

This paper aims to investigate the abrasion resistance performance of Iron-Crhomium-
Carbon+ Niobium (Fe-Cr-C+ Nb) coatings deposited by Flux-Cored Arc Welding (FCAW) …

The present study reports the effect of WC particle (20%, 30%, and 40%) and secondary
processes (Heat Treatment and Laser Treatment) on the mechanical properties of NiCrBSi …

In the present study, two different types of coatings such as NiCrMoNb and NiCrBSiC were
produced on titanium alloy using a high power Yb: YAG disk laser. Then the coatings were …

To enhance the hardness and wear resistance of cold work mold, Al 2 O 3 reinforced WC–
10Co4Cr coatings were fabricated on Cr12MoV steel using a laser cladding (LC). The …