The temperature-dependent materials properties on the dry sliding wear resistance of the
detonation sprayed Ni-20% Cr coating have been studied. In-situ high-temperature X-ray …

The tribological behavior of detonation (DSC) sprayed Ni-5% wtAl coatings at room
temperature (25° C) and elevated temperature (850° C) has been studied in this work. Dry …

In this paper, we report on the microstructure and properties study of the Ni-Al system (75/25
at.%) coatings obtained by atmospheric plasma spraying (APS) and high-velocity plasma …

High temperature corrosion and slag deposition significantly reduce the thermal efficiency
and lifespan of biomass-fired boilers. Surface modification with protective coatings can …

Abstract The reactivity of Al 0.66 Ti 0.33 N, Al 0.31 Ti 0.62 Si 0.07 N, Al 0.60 Cr 0.40 N, and
Al 0.38 Cr 0.54 Si 0.07 N cathodic arc-coated hardmetal tools with Inconel 718 has been …

Ni-5% Al metallic coating was deposited on Nickel-based superalloy (IN718) specimens
using the detonation spray coating (DSC) method. Detonation spraying yielded coating with …

The present study evaluates the microstructural features of high velocity oxy-fuel (HVOF)
sprayed Ni–20Al coatings with liquefied petroleum gas (LPG) as fuel. The Ni–20Al coatings …

In this study, the surface properties of marine structures were improved by applying a twin
wire arc spray process to high-strength low alloys. The effect of Al and Mo contents in Ni-Al …

Corrosion behaviour of hot-dip aluminized-coated and uncoated Alloy 718 was examined in
dry air and with NaCl salt. Tests were done at 750° C for 10 h and cooled to room …

The hot-corrosion behavior of detonation-gun sprayed Cr 3 C 2-NiCr coatings with and
without 0.4 wt.% CeO 2 additive on Ni-based superalloy inconel-718 is comparatively …