Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties

M Ramesh - Progress in Materials Science, 2016 - Elsevier
The non-wood plants became an alternative solution or source of fibrous material in this
millennium due to increasing population and industrialization along with better education. In …

Processing and characterization of polyethylene-based composites

PN Khanam, MAA AlMaadeed - Advanced Manufacturing: Polymer …, 2015 - Taylor & Francis
Thermoplastic matrix polymer composites have gained commercial success in the
semistructural and structural applications. Polyethylene (PE) is one of the most versatile and …

Application of sunflower husk, hazelnut shell and walnut shell as waste agricultural fillers for epoxy-based composites: A study into mechanical behavior related to …

M Barczewski, K Sałasińska, J Szulc - Polymer Testing, 2019 - Elsevier
In the present study three types of agricultural waste materials were applied as fillers for
manufacturing epoxy-based composites: walnut shell (WS), hazelnut shell (HS) and …

A review on natural fibre-based composites—Part II: Application of natural reinforcements in composite materials for automotive industry

D Puglia, J Biagiotti, JM Kenny - Journal of natural fibers, 2005 - Taylor & Francis
Natural abundance, much higher strength per unit weight than most inorganic fillers, lower
density and their biodegradable nature make natural fillers attractive as reinforcements of …

Biocomposites from waste derived biochars: Mechanical, thermal, chemical, and morphological properties

O Das, AK Sarmah, D Bhattacharyya - Waste management, 2016 - Elsevier
To identify a route for organic wastes utilisation, biochar made from various feedstocks
(landfill pine saw dust, sewage sludge, and poultry litter) and at diverse pyrolysis conditions …

Wood fibres as reinforcements in natural fibre composites: structure, properties, processing and applications

D Dai, M Fan - Natural fibre composites, 2014 - Elsevier
Wood fibres are the most abundantly used cellulose fibre. They have been extensively used
in the modern composite industry due to their specific characteristics. This chapter …

[HTML][HTML] Effects of fiber geometry and orientation distribution on the anisotropy of mechanical properties, creep behavior, and thermal expansion of natural fiber/HDPE …

X Hao, H Zhou, B Mu, L Chen, Q Guo, X Yi… - Composites Part B …, 2020 - Elsevier
Natural fiber/high-density polyethylene (HDPE) composites (NFPCs) were fabricated via
extrusion using three types of natural fibers from poplar wood (PW), radiata pine (RP), and …

Bio-based composites from waste agricultural residues

A Ashori, A Nourbakhsh - Waste management, 2010 - Elsevier
The main objective of this research was to study the potential of waste agricultural residues
such as sunflower stalk, corn stalk and bagasse fibers as reinforcement for thermoplastics as …

Fabrication, characterization and evaluating properties of 3D printed PLA-Mn scaffolds

S Dehghan-Toranposhti, R Bakhshi, R Alizadeh… - Scientific Reports, 2024 - nature.com
Polylactic acid (PLA) based scaffolds have attained considerable attention in recent years
for being used as biodegradable implants in bone tissue engineering (BTE), owing to their …

[HTML][HTML] Recycling end-of-life WPC products into ultra-high-filled, high-performance wood fiber/polyethylene composites: A sustainable strategy for clean and cyclic …

H Zhou, W Li, X Hao, G Zong, X Yi, J Xu, R Ou… - Journal of Materials …, 2022 - Elsevier
As “green” composites, recycling end-of-life wood-plastic composites (WPCs) is crucial for
sustainable and efficient resource utilization and carbon neutrality. In this study, waste WPC …