Cold unidirectional/cross-rolling of austenitic stainless steels: a review

S Mohammadzehi, H Mirzadeh - Archives of Civil and Mechanical …, 2022 - Springer
The effects of cold unidirectional/cross-rolling on the development of substructure, strain-
induced martensitic transformation, crystallographic texture (preferred orientation), and …

Crystallographic-orientation-dependent magnetic properties of Fe–Ni permalloy in-situ alloyed using additive manufacturing

F Haftlang, ES Kim, HS Kim - Journal of Materials Processing Technology, 2022 - Elsevier
The present study focused on improving the magnetic properties of in-situ synthesized Fe–
Ni permalloy by engineering the predominant crystallographic texture. To this end, Fe–50 …

Effect of microstructure and texture on the evolution of mechanical properties in a cold rolled and annealed UNS S32101 lean duplex stainless steel sheet

TR Dandekar, A Kumar, RK Khatirkar, D Kumar… - Materials Chemistry and …, 2023 - Elsevier
In the present investigation, the effect of microstructure and texture on the evolution of
mechanical properties during recrystallization for 80% unidirectionally cold rolled UNS …

Strain rate sensitivity behaviour of Fe–21Cr-1.5 Ni–5Mn alloy and its constitutive modelling

TR Dandekar, RK Khatirkar, A Gupta… - Materials Chemistry and …, 2021 - Elsevier
In the present investigation, hot deformation behaviour of Fe–21Cr-1.5 Ni–5Mn alloy was
studied by performing isothermal unidirectional hot compression tests. The tests were …

Effect of isothermal aging at 750 C on microstructure and mechanical properties of UNS S32101 lean duplex stainless steel

TR Dandekar, A Kumar, RK Khatirkar, J Singh… - Materials Today …, 2021 - Elsevier
UNS S32101 lean duplex stainless steel (DSS) has a two phase microstructure consisting of
austenite and ferrite in near equal proportions. Aging at high temperature results in …

Unidirectional cold rolling of Fe-21Cr-5Mn-1.5 Ni alloy–Microstructure, texture and magnetic properties

TR Dandekar, RK Khatirkar, A Kumar… - Journal of Magnetism …, 2022 - Elsevier
In the present work, changes in microstructure, texture and magnetic properties during
unidirectional cold rolling of a Fe-21Cr-5Mn-1.5 Ni alloy were investigated. For …

Investigation on impact of heat input on microstructural, mechanical, and intergranular corrosion properties of gas tungsten arc-welded Ti-stabilized 439 ferritic …

SK Gupta, AP Patil, RC Rathod, V Tandon… - Journal of Materials …, 2022 - Springer
In the present study, gas tungsten arc welding was employed to weld Ti-stabilized 439
ferritic stainless steel using 308L austenitic stainless steel filler electrode with varying heat …

Aging phenomenon in low molybdenum Fe-21Cr-5Mn-1.5 Ni alloy: Microstructure evolution, texture development and corrosion behavior

TR Dandekar, RK Khatirkar, D Mahadule… - Materials Today …, 2022 - Elsevier
In the present work, the effect of long-term aging at 750° C up to 480 h on microstructure
evolution, texture development and corrosion behavior of a low molybdenum Fe–21Cr-1.5 …

Insights into the Microstructure and Texture Evolution Using Electron Backscattered Diffraction and Thermal Stability of Low Mn Fe–25Cr–6.5 Ni–3.5 Mo Alloy

TR Dandekar - Arabian Journal for Science and Engineering, 2024 - Springer
The effect of weld chemistry (two types of electrodes (E2594 and E2595)) on the
microstructure and texture development using electron back scattered diffraction and …

Insights into the influence of cold rolling and accelerated isothermal aging on microstructure evolution, corrosion performance, σ precipitation and its kinetics in a low …

TR Dandekar, RK KS, J Chavhan, R Shah… - Materialia, 2023 - Elsevier
In the present work, effect of cold rolling and accelerated isothermal aging at 800° C on the
microstructural changes and corrosion behavior in a low molybdenum Fe-21Cr-5Mn-1.5 Ni …