Effect of initial grain size on hot deformation behaviour of Cu-Cr-Zr-Ti alloy
Hot uniaxial compression tests were carried out on Cu-0.8 Cr-0.05 Zr-0.05 Ti (wt%) alloy
specimens with three different grain sizes: 30 μm, 150 μm and 450 μm to study the effect of …
specimens with three different grain sizes: 30 μm, 150 μm and 450 μm to study the effect of …
Effect of deformation mode on hot deformation characteristics and microstructural evolution in Cu-Cr-Zr-Ti alloy
Uniaxial (UC) and plane strain compression (PSC) tests were performed on the Cu-Cr-Zr-Ti
alloy specimens to investigate the effect of the deformation mode on the stress-strain …
alloy specimens to investigate the effect of the deformation mode on the stress-strain …
Dynamic recrystallization in Cu-Cr-Zr-Ti alloy under large plane strain conditions
Abstract The Cu-Cr-Zr-Ti alloy was subjected to single-hit plane strain compression tests in
the temperature range of 923 K to 1073 K (650° C to 800° C) and at two different strain rates …
the temperature range of 923 K to 1073 K (650° C to 800° C) and at two different strain rates …