Anodizing is a well-documented surface treatment that is inserted in a complex protection
system against corrosion applied to Al alloys. In the scientific literature, there are many …

The presentation gives an insight into the fascinating world of anodizing as corrosion
protection but also goes far beyond. Starting with an introduction to the formation of anodic …

The mechanism of growth of anodic titanium oxide in sulphuric acid has been investigated
by potentiostatic and potentiodynamic anodizing, electrochemical impedance spectroscopy …

In this work, porous anodic oxides were produced by traditional and modified tartaric sulfuric
anodizing (TSA) processes and sealed in hot water, chromate and cerium based solutions …

The anodizing behavior of iron-containing intermetallic particles in AA2099 aluminum-
lithium alloy and their effect on structure and corrosion resistance of the anodic film were …

AA2099-T8 aluminium alloy was anodized at a current density of 5mA/cm2 to selected
voltages in 0.1 M ammonium pentaborate electrolyte at 293K. It was found that the growth of …

The anodizing behavior of a lithium-containing aluminum alloy (AA 2099-T8) in an
environmentally friendly electrolyte, namely tartaric–sulfuric acid (TSA), has been examined …

Abstract T 1 (Al 2 CuLi) phase precipitates, the main strengthening precipitates in third
generation aluminum-copper-lithium (Al-Cu-Li) alloys, play a critical role in determining the …

Microstructure characteristics of two high-strength aluminum alloys, the 2024-T3 Al–Cu–Mg,
and the new generation Al–Cu–Li alloy 2198, in the T8 and T851 tempers, were investigated …

In this study, scanning electron microscopy and electrochemical techniques were used to
investigate the effect of the Cu content on the microstructure and corrosion resistance of …