Anodizing is a well-documented surface treatment that is inserted in a complex protection
system against corrosion applied to Al alloys. In the scientific literature, there are many …

Microstructure and corrosion behaviour associated with intermetallic particles (IMPs) in
2A97 Al-Cu-Li alloys of different thermomechanical conditions are characterized by a wide …

The effectiveness of strontium zinc phosphosilicate (SZP 391) as a corrosion inhibitor for the
protection of Al–Cu–Li alloy in 0.5 M NaCl solution was evaluated using electrochemical …

Electrochemically heterogeneous entities were revealed to vary with time during the micro-
galvanic corrosion associated with T 1 precipitates in AA2195 alloy. Microscopic analyses …

Corrosion-induced surface deterioration as well as mechanical properties degradation of
AA2198-T351 were experimentally investigated and compared against AA2024-T3. Pre …

Four different types of localized corrosion morphologies associated with Al 20 Cu 2 Mn 3
dispersoids (T phases) in an AA2195 alloy were traced using atom-resolved …

Localized electrochemical methods supported by surface analytical characterizations were
employed to investigate galvanic coupling effects and local electrochemical activity …

A novel potentiometric Al 3+− ion selective microelectrode (ISME), with internal solid contact,
based on the use of a neutral carrier morin as ionophore is reported. The ability of the ISME …

Scanning electrochemical microscopy (SECM) and scanning vibrating electrode technique
(SVET) were used to investigate the electrochemical behaviour of the top surface of the …

The anisotropic mechanical behavior of Al–Cu–Li (AA2198) alloy under different artificial
ageing conditions as well as for different thicknesses of the material was examined in the …