Piezoelectricity in native bones has been well recognized as the key factor in bone
regeneration. Thus, bio-piezoelectric materials have gained substantial attention in repairing …

Additive manufacturing (AM) is a novel manufacturing technology that can create highly
customized products with more complex geometries than traditional techniques. Despite its …

In this study, fine lattice structural titanium dioxide ceramics were produced by DLP 3D
printing. A suitable titanium dioxide ceramic slurry for DLP 3D printing was prepared. TiO 2 …

Laser powder bed fusion (LPBF) combined with reaction bonding (RB) of Al particles is an
effective method for preparing high-performance 3D Al 2 O 3 ceramic foams. However, the …

Continuous flow reactor, due to the characteristics of safety and stability, faster reaction, less
solvent demand, smaller occupied area and less energy requirements, is a satisfactory …

In this study, a novel hollow alumina sphere-based ceramic enhanced by in situ mullite
whisker framework was recommended. Hollow alumina spheres selected as the main pore …

This study develops a hybrid 3D printing approach that combines fused deposition modeling
(FDM) and digital light processing (DLP) techniques for fabricating bioscaffolds, enabling …

Zirconia ceramic green parts were prepared by gelcasting using acetone-soluble plastic
molds printed by fused deposition modeling (FDM) method. The demolding process was …

Abstract Three-dimensional (3D) printing technology is developing rapidly and already plays
an important role in many areas like industrial, medical, aerospace, and automotive fields …

This work represents the shaping of alumina–zinc oxide (AZ) samples with the direct
coagulation casting method. The effect of zinc oxide (0, 10, 20, 30, and 40 wt%) and the …