[HTML][HTML] Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
The unique combination of very large strains, high temperatures and high strain rates
inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency …
inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency …
A comprehensive review of magnesium-based alloys and composites processed by cyclic extrusion compression and the related techniques
M Ebrahimi, Q Wang, S Attarilar - Progress in Materials Science, 2023 - Elsevier
Magnesium, its alloys and composites with an approximate density of two-thirds of aluminum
and a quarter of steel are the most prominent engineering materials in various industries …
and a quarter of steel are the most prominent engineering materials in various industries …
Design and analysis of ECAP Processing for Al6061 Alloy: a microstructure and mechanical property study
In this study, equal channel angular pressing (ECAP) method is used to obtain fine grain
microstructure in Al 6061 alloy at room and elevate temperatures. The billet samples are …
microstructure in Al 6061 alloy at room and elevate temperatures. The billet samples are …
Additive manufacturing of high-strength CrMnFeCoNi high-entropy alloys-based composites with WC addition
J Li, S Xiang, H Luan, A Amar, X Liu, S Lu… - Journal of Materials …, 2019 - Elsevier
Laser melting deposition with WC addition has been developed to fabricate high-strength
CrMnFeCoNi-based high-entropy alloys-based composites. By this technique, a …
CrMnFeCoNi-based high-entropy alloys-based composites. By this technique, a …
Deformation microstructures, strengthening mechanisms, and electrical conductivity in a Cu–Cr–Zr alloy
R Mishnev, I Shakhova, A Belyakov… - Materials Science and …, 2015 - Elsevier
The ultrafine-grained microstructures, mechanical properties and electrical conductivity of a
Cu–0.87% Cr–0.06% Zr alloy subjected to multiple equal channel angular pressing (ECAP) …
Cu–0.87% Cr–0.06% Zr alloy subjected to multiple equal channel angular pressing (ECAP) …
The deformation behavior of the {111} Al plates in an Al-Cu-Mg-Ag alloy
The deformation behavior of {111} Al Ω plates has been analyzed in an Al-Cu-Mg-Ag alloy
after creep tests to fracture by atomic-resolution scanning transmission electron microscopy …
after creep tests to fracture by atomic-resolution scanning transmission electron microscopy …
Effect of grain boundary characteristic on intergranular corrosion and mechanical properties of severely sheared Al-Zn-Mg-Cu alloy
J Li, F Li, X Ma, J Li, S Liang - Materials Science and Engineering: A, 2018 - Elsevier
Three kinds of heat treatment procedure, namely solid solution treatment (SST),
homogenization heat treatment (HHT) and aging heat treatment (AHT), were adopted to …
homogenization heat treatment (HHT) and aging heat treatment (AHT), were adopted to …
Experimental analyses and numerical modeling of the microstructure evolution of aluminum alloy using an internal state variable plasticity-based approach coupled …
X Tian, F Chen, J Jiang, G Wu, Z Cui, D Qian… - International Journal of …, 2022 - Elsevier
Continuous dynamic recrystallization (cDRX) is an effective way to refine the microstructures
of materials with high stacking fault energies during their hot working. However …
of materials with high stacking fault energies during their hot working. However …
Effect of temperature of isothermal multidirectional forging on microstructure development in the Al-Mg alloy with nano-size aluminides of Sc and Zr
O Sitdikov, R Garipova, E Avtokratova… - Journal of Alloys and …, 2018 - Elsevier
The effect of deformation temperature on structural changes in the homogenized ingot of a
complex-alloyed aluminum alloy 1570C (Al-5% Mg-0.2% Sc-0.1% Zr) during hot isothermal …
complex-alloyed aluminum alloy 1570C (Al-5% Mg-0.2% Sc-0.1% Zr) during hot isothermal …
Effect of multidirectional forging on the grain structure and mechanical properties of the Al–Mg–Mn alloy
MS Kishchik, AV Mikhaylovskaya, AD Kotov… - Materials, 2018 - mdpi.com
The effect of isothermal multidirectional forging (IMF) on the microstructure evolution of a
conventional Al–Mg-based alloy was studied in the strain range of 1.5 to 6.0, and in the …
conventional Al–Mg-based alloy was studied in the strain range of 1.5 to 6.0, and in the …