In this study, the pulsed laser deposition technique was applied for the preparation and
characterization of Cu 2 (Zn x Mg 1-x) SnS 4 (CZMTS) thin films for solar cell applications …

The introduction of the alkaline-earth element Magnesium (Mg) into Cu2ZnSn (S, Se) 4
(CTZSSe) is explored in view of potential photovoltaic applications. Cu2Zn1− xMgxSn (S …

Abstract Mg-doped Cu 2 ZnSnSe 4 (CZTSe) bulk materials with the (Cu 2− x Mg x) ZnSnSe
4 formula at x= 0, 0.1, 0.2, 0.3, and 0.4 were prepared at 600° C for 2 h with soluble sintering …

Abstract Mg-doped Cu 2 SnSe 3 bulk materials with the (Cu 2− x Mg x) SnSe 3 (Mg-x-CTSe)
formula at x= 0, 0.05, 0.1, 0.15, and 0.2 were prepared at 550° C for 2 h with soluble …

Abstract Copper Indium Gallium Selenide (CIGS) thin film solar cell absorber layers are
fabricated by the conventional co-evaporation of metal stack precursors followed by a …

Cu 2 ZnSnS 4 (CZTS) is a quaternary semiconductor that has emerged as a promising
component in solar absorber materials due to its excellent optical properties such as band …

Abstract Effects of the Cu variation on the morphological, structural, and electrical properties
of bulk Cu x SnSe 3 (CTSe) with x= 1.6–2.2 have been investigated. Dense CTSe pellets …

Abstract Mg-doped Cu 2 SnSe 3 films were prepared by DC magnetron co-sputtering at
room temperature for 1 h with two different targets of Cu and Sn or Cu-Mg and Sn based …

P-type Cu2FeSnS4 (CFTS) and Cu2ZnSnS4 (CZTS) quaternary chalcogenide films have
been grown by the method of spin coating on glass substrates relate to 30 and 40 sccm …

P-type Cu2FeSnS4 (CFTS) and Cu2ZnSnS4 (CZTS) quaternary chalcogenide films have
been grown by the method of spin coating on glass substrates relate to 30 and 40 sccm …