As a crucial branch for titanium industry, high-strength titanium alloys (HS-TAs, with UTS≥
1100 MPa) are indispensable structural materials for advanced engineering applications …

Since its discovery in 1954, the omega (ω) phase in titanium and its alloys has attracted
substantial attention from researchers. The β-to-ω and ω-to-α phase transformations are …

Enhancing both strength and ductility simultaneously in commercial alloys at an industrial
scale remains a challenging task. In this study, we have demonstrated a simple heat …

Beta titanium alloys were recognized as a distinct materials class in the 1950s, and following
the introduction of Ti-13V-11Cr-3Al in the early 1960s, intensive research occurred for …

Lightweighting of automobiles by use of novel low-cost, high strength-to-weight ratio
structural materials can reduce the consumption of fossil fuels and in turn CO 2 emission …

Abstract Ti-6Al-4V alloys, widely used as medical implants, suffer from low wear resistance
inhuman body fluids, restricting their applications in the biomedical field. This study …

Near-alpha titanium alloy Ti6242Si, widely used in aero-engine compressor discs, was
subjected to low cycle fatigue loading at room temperature. Fracture initiated by facet …

Abstract Two alloys, Ti-6Al-2V and Ti-2Al-16V, simulating the alpha and beta phases of Ti-
6A1-4V, respectively, were prepared with oxygen concentrations from 0.07 to 0.65 wt pct …

The purpose of the present work is to reveal the effect of annealing temperature on the
microstructure and mechanical properties of multilevel lamellar microstructure of TC21 …

Effects of ω phase precipitation on β→ α, α′′ transformations in a metastable β titanium
alloy have been studied by means of transmission electron microscopy. Isothermal holding …