Multicomponent high‐entropy alloys (HEAs) can be tuned to a simple phase with some
unique alloy characteristics. HEAs with body‐centered‐cubic (BCC) or hexagonal‐close …

Laves phases with their comparably simple crystal structure are very common intermetallic
phases and can be formed from element combinations all over the periodic table resulting in …

Additive manufacturing by laser melting deposition is a powerful technology for fabricating
complex-shaped alloys from powder feedstocks. However, such products typically have poor …

In this work, FeCoNiCrMo high-entropy (HEA) coating and CeO 2/FeCoNiCrMo composite
coating were successfully prepared on the surface of TC4 alloy by laser cladding …

In this work, a novel surface strengthening strategy for Mg-Li alloys was proposed, called
cold spraying assisted high-speed laser cladding. CuAl9 aluminum bronze coating was …

In this work, a novel Ni 1.5 CrCoFe 0.5 Mo 0.1 Nb 0.68 eutectic HEA coating with nano-
lamellar microstructure was successfully designed by binary eutectic compositions strategy …

Alloying traditionally enhances material properties by adding small amounts of secondary
elements to a primary base. Over the past decade and a half, a revolutionary strategy has …

Single-phase face-centered cubic (fcc) alloys typically exhibit remarkable strain-hardening
capability and large ductility but possess low yield strength. Conventional strengthening …

A nanoscale sigma (σ) phase strengthened Co 34.5 Cr 30 Ni 26.5 Al 5.4 W 3.6 (at,%) high
entropy alloy was prepared and showed high strength and ductility. Dual phase …

The effects of Y 2 O 3 on the microstructure, microhardness, wear resistance, high-
temperature oxidation resistance, hot corrosion resistance, and electrochemical corrosion …