Additive manufacturing of titanium-based alloys-A review of methods, properties, challenges, and prospects

TS Tshephe, SO Akinwamide, E Olevsky, PA Olubambi - Heliyon, 2022 - cell.com
The development of materials for biomedical, aerospace, and automobile industries has
been a significant area of research in recent years. Various metallic materials, including …

Research progress of laser cladding on the surface of titanium and its alloys

H Zhao, C Zhao, W Xie, D Wu, B Du, X Zhang, M Wen… - Materials, 2023 - mdpi.com
Titanium (Ti) and its alloys have been widely employed in aeronautical, petrochemical, and
medical fields owing to their fascinating advantages in terms of their mechanical properties …

Influence of Y2O3 addition on the microstructure of TiC reinforced Ti-based composite coating prepared by laser cladding

Z Zhang, Q Yang, Z Yu, H Wang, T Zhang - Materials characterization, 2022 - Elsevier
TiC reinforced Ti-based composite coatings were prepared on the Ti6Al4V surface via laser
cladding with Ti6Al4V/NiCr-Cr 3 C 2/Y 2 O 3 mixed powders. Influence of Y 2 O 3 on forming …

Optimizing the microstructures and enhancing the mechanical properties of AZ81 alloy by adding TC4 particles

J Cui, H Yang, Y Zhou, J Tan, X Chen, J Song… - Materials Science and …, 2023 - Elsevier
In this work, AZ81 alloys reinforced with 3 wt%, 6 wt% and 9 wt% TC4 (Ti–6Al–4V) particles
were fabricated using two-step stirring. The tensile results revealed that the TC4 particles …

[HTML][HTML] Hybrid additive manufacturing of Ti6Al4V with powder-bed fusion and direct-energy deposition

S Malej, M Godec, Č Donik, M Balazic, R Zettler… - Materials Science and …, 2023 - Elsevier
A single component can often benefit from being built using more than a single processing
technique. Here, we investigated the hybrid additive manufacturing (HAM) of Ti6Al4V using …

Effect of heat treatment on some titanium alloys used as biomaterials

MS Baltatu, C Chiriac-Moruzzi, P Vizureanu, L Tóth… - Applied Sciences, 2022 - mdpi.com
Titanium-based alloys are constantly improved to obtain properties suitable for their use.
Improving titanium alloys is very important for performing alloys without side effects. In this …

Effects of tungsten alloying and fluorination on the oxidation behavior of intermetallic titanium aluminides for aerospace applications

A Donchev, L Mengis, A Couret, S Mayer, H Clemens… - Intermetallics, 2021 - Elsevier
Current limitations to a wider use of intermetallic TiAl alloys in aircraft and automotive
engines arise from an insufficient oxidation resistance at temperatures above approximately …

[HTML][HTML] Effect of alternating current on the electrochemical behavior and stress corrosion cracking of TA2 in simulated marine environment

T Chen, Z Zeng, X Zhou, H Gao, C Liu, Z Liu… - Journal of Materials …, 2023 - Elsevier
This study investigated the effect of alternating current (AC) on the electrochemical and
stress corrosion cracking (SCC) behavior and mechanism of TA2 in a simulated marine …

Process parameter optimization for laser directed energy deposition (LDED) of Ti6Al4V using single-track experiments with small laser spot size

A Gonnabattula, RS Thanumoorthy, S Bontha… - Optics & Laser …, 2024 - Elsevier
Single-track experiments are routinely used in the optimization of process parameters in
additive manufacturing processes. Most of the process parameter optimization studies use a …

Influence of Fe on the microstructure, superplasticity and room-temperature mechanical properties of Ti–4Al–3Mo–1V-0.1 B alloy

AD Kotov, MN Postnikova, AO Mosleh… - Materials Science and …, 2022 - Elsevier
Decreasing the superplastic forming temperature of Ti alloys is currently an important issue.
This study investigated the impact of modifying the Ti–Al–Mo–V alloy with different …