The brittleness and work-softening of Bulk Metallic Glasses (BMGs) prevent their wide
applications as structural engineering materials. In order to settle this problem, the BMG …

The current research of high-entropy alloys (HEAs) is mainly focused on simple solid-
solution alloys or alloys with precipitation strengthening phases. In the present work, we …

In situ neutron diffraction compression tests were performed on Mg–Y–Nd–Zr alloy WE43, in
the solution heat-treated, peak-and over-aged conditions. The flow curves and internal strain …

In this study, a new Nb 30 Mo 30 Hf 20 Co 20 (at.%) refractory high entropy alloy (RHEA)
comprising an intermetallic (Hf, Co)-rich B2 matrix and disordered (Nb, Mo)-rich bcc particles …

The common concept for the development of the high-performance metallic materials is
associated with the combination of a soft disordered matrix and hard ordered …

The deformation mechanisms in the refractory high entropy alloy AlMo 0.5 NbTa 0.5 TiZr
have been investigated, with their potential impact on ductility. Specifically, the modes of …

Although refractory high-entropy alloys (RHEAs) possess excellent softening resistance and
thermal stability at high temperatures, their practical application is often limited due to room …

Refractory high-entropy alloys (HEAs) are a new class of metallic materials based on group
4–6 elements of the periodic table with possible additions of Al, Si, Re, C, or B. Some single …

It is known that Cu-Sn alloy is difficult to hot working due to Sn segregation which occurs
during solidification. Sn segregation is formed at grain boundary and it acts as crack …

The use of neutrons has extended the technique of diffraction strain measurement from an
essentially two-dimensional, near-surface tool using X-rays to a true three-dimensional …