Grain boundary engineering (GBE) is considered to be an attractive approach to
microstructure control, which significantly enhances the grain-boundary-related properties of …

Single-layer and multilayer alloy deposits were coated onto a mild steel substrate by a
single-bath electroplating process. The developed coating consists of Zn and Fe alloys …

We report on the electrodeposition of a zinc-nickel alloy using a sulphate bath on mild steel
(MS) substrate. The Hull cell experiment was used to optimize the bath composition and …

A new sulfate bath having ZnSO 4. 6H 2 O, NiSO 4. 6H 2 O, citric acid, and methanol extract
in combination was optimized for the deposition of Zn-Ni electroplating on mild steel. The …

A Zn-based coating with excellent corrosion resistance was prepared on the surface of AZ31
magnesium alloy by novel hot-dip process. The microstructure, growth process and …

The deposition mechanism of Ni-Co alloys with different cobalt compositions plays an
important role in the preparation and application of Ni-Co alloys by electrodeposition. Cyclic …

Deep-eutectic solvent (DES) was used widely as an eco-friendly and sustainable process in
the zinc (Zn) electroplating in this study. Both the conventional and supercritical carbon …

In this study, we developed and optimized a trivalent chromium coating electrodeposited on
304L stainless steel (SS) from a Cr-trivalent bath. The results reveal that the Cr coatings at …

The nickel electrodeposition coating onto a stainless steel AISI 304 substrate was performed
in a sulfate–chloride bath using cyclic voltammetry, chronoamperometry, and linear scan …

The use of cold atmospheric plasma (CAP)-assisted deposition of SiO x coatings is
investigated as an effective passivating ceramic nanocoating for copper traces, ensuring the …