The hot deformation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy was explored in
the isothermal hot compression test with a temperature range of 300–500° C and a strain …

Abstract Al–Zn–Mg–Cu alloys can be fabricated by a series of thermo-mechanical
processing methods (eg, hot rolling, forging and extrusion), which is able to serve in …

Dynamic precipitation and recrystallization behavior during middle-temperature and
appropriate strain rates provide a chance to obtain desirable structure, which significantly …

Isothermal uniaxial compression experiments were performed in the range of 300–450° C
and 0.001 to 10 s− 1 to clarify the hot deformation behavior of homogenized Al–5Mg–3Zn …

The hot compression tests for spray deposited alloy 2195 were performed on Gleeble-1500
thermomechanical simulator at different conditions. The constitutive models and processing …

In the present work, hot compression deformation behavior and microstructure evolution in a
homogenized Al–6Mg–0.8 Mn alloy with nano-sized Al 6 Mn phase particles were …

Abstract An Al-Zn-Mg-Cu alloy was isothermal compressed at temperatures ranging from
300° C to 450° C with strain rates ranging from 10− 5 s− 1 to 10 s− 1 to study its deformation …

The flow behavior, microstructure evolution and softening mechanism of an AA7085
aluminum alloy are investigated by isothermal hot compression tests at 450° C with the …

The hot deformation behavior of homogenized AA2070 Al–Li–Cu alloy was studied using
isothermal compression in a temperature range of 300° C–500° C and a strain rate range of …

Hot tensile deformation behavior of AA7075 was studied on a Gleeble-3500 thermal
simulation machine. The deformation temperatures were 300° C, 350° C, 400° C, 450° C …