Nanomaterials are widely used in modern technologies due to their unique properties.
Developing methods for their production is one of the most important scientific problems. In …

Binary chromium carbides display excellent wear resistance, extreme stiffness and oxidation
resistance under high temperature. The influence of applied pressure on electronic …

The wear resistance of NiCr–Cr 3 C 2 cermet coatings is highly dependent on the feature of
carbides. In the present work, NiCr–Cr 3 C 2 coatings were deposited by two typical high …

In the present work, production of the chromium carbide was investigated by reduction of
chromium oxide with methane-containing gas mixture. The experiments were conducted on …

NiAl intermetallic compound was synthesized by mechanical alloying of elemental mixtures
of Ni and Al powders in a Spex mill. The compound formation took place according to a …

Chromium carbide nanopowder (Cr 3 C 2) has been synthesized from chromium oxide (Cr 2
O 3) by chemical-reduction route under autogenic pressure of hydrogen and CO gases at 87 …

Nanostructure chromium carbides were fabricated by mechanical alloying in a Fritsch
planetary ball mill. The morphological changes and the effect of milling time and elementary …

The influence of milling and subsequent consolidation treatments on the microstructural
properties and hardness of the fabricated Cr3C2, Cr7C3 and Cr23C6 ceramic powders are …

The resource utilization of waste plastic can solve the problems of energy shortage and
environment pollution simultaneously to achieve sustainable development. Preparation of …

The aim of this work is to quantitatively describe the carbide loss during plasma deposition
of metal carbide coatings and link it to the microstructure and performance of the as-sprayed …