Aluminium alloy components are used in lightweight engineering applications and lack
mechanical properties, wear resistance, and corrosion resistance. When hard reinforcement …

Aluminium–matrix composites (AMCs) are developed to meet the demands of light weight
high performance materials in aerospace, automotive, marine and other applications. The …

Particulate reinforced Al-MMCs exhibits better mechanical properties and improved wear
resistance over other conventional alloys. In the present paper, the experimental results of …

The effect of rutile (TiO 2) content on the wear and microhardness properties of aluminium
(Al)-based hybrid composites was explored. The proposed content of TiO 2 (0, 4%, 8 …

A low cost system of Al 6063− xTiB2 (x= 0, 5, 10wt.%) in situ metal matrix composites
(MMCs) were prepared by the reaction mixture of K2TiF6 and KBF4 with molten alloy. These …

In this study, a self-lubricating and wear resistant surface hybrid Al-base composite
reinforced with a mixture of SiC and MoS2 particles has been successfully fabricated by …

A wear rate prediction model for aluminum based composites reinforced with 10 and 30wt.%
in situ aluminum diboride (AlB2) flakes was developed using Taguchi's method by …

The influence of rock dust size (10–30 µm) and mass fraction (5%–15%) on density,
hardness and dry sliding wear behavior of Al 6061/rock dust composite processed through …

In this study, the microstructural features, mechanical properties and dry sliding wear
characteristics of Al–4.5 Cu–3Mg/15vol.% SiCp matrix composites, manufactured by …

The tribological behaviour of recycled low density polyethylene (RLDPE) polymer
composites with bagasse ash particles as a reinforcement was studied using a pin-on-disc …