Several tapered-and sharp-edge nozzles with different exit diameters were used to
investigate their effect on the near-field characteristics of a liquid jet injected transversely …

Engineering the polarization and spatial phase of ultrafast laser pulses represents a
compelling strategy for enhancing control over laser–matter interaction and enabling rapid …

High-pressure water jets are often used as a tool for cleaning, cutting or for modification of
the surface morphology. The nozzle design has a considerable influence on cavitation and …

This work investigates cavitation patterns after a cylindrical coaxial orifice at different orifice
to outlet channel diameter ratios β< 0.1. Further the influence of cavitation pattern on …

In many cases of industrial application, nozzles run under the condition of high back
pressure, but it is difficult to determine the discharge coefficient of a nozzle due to the lack of …

Abstract Two-dimensional (2D) few-layer molybdenum disulfide (MoS 2) is a versatile future
electronic material with fascinating unique properties, but the commercialization of its' …

High pressure homogenization is widely used to produce small droplets in liquid products.
The use of two homogenization units (eg orifices) in series thereby is generally accepted as …

Reduction of energy expenditures required for various technological processes is a pressing
issue in today's economy. One of the ways to solve this issue in regard to liquefied natural …

This paper analyses the effects of nozzle geometry on sprays produced by a blurry injector
using water as test fluid. Significant differences on the sprays formed by the injector were …

Experimental investigation on discharge coefficient, C d, for high viscosity fluid through
nozzles was carried out. The viscosity of the fluid used for the test ranged from 350 to 1500 …