The severe deterioration of the interface is a crucial factor to restrict the performance
improvement of composites. In order to understand the effect of interfacial structure on the …

Poor interfacial structure and severe agglomerations of carbon fiber (CF) are significant
problems that face carbon fiber reinforced aluminium (CF/Al) composites. Thus, CF was …

A two directional high thermal conductive carbon fiber reinforced aluminum matrix
composite with low interface damage is prepared by a vacuum hot-pressure diffusion …

Porous carbon fiber-reinforced Al-Si alloy matrix composites and carbon fiber felt-reinforced
Al-Si alloy matrix composites with carbon content of 10 wt.% were prepared by die casting …

To optimize interface microstructure between 7075Al matrix and CFs, Ni–Co–P multi-
component alloy coatings coated carbon fibres were prepared by electroless plating firstly …

Interfacial products are well accepted as an important factor to improve the interfacial status
and forming quality of short carbon fibers (C sf) reinforced magnesium-7.6 wt% aluminum …

In this paper, Ni coatings with different thickness (∼ 0.21 μm,∼ 0.46 μm,∼ 0.65 μm,∼ 0.76
μm) were applied on the surface of carbon fiber (CF) by electroless plating process and …

Efficiently joining TC4 and carbon fiber-reinforced aluminum matrix (C f/Al) composite
greatly expands the applications of composite in the aerospace industry. In this study, a …

Carbon fiber-reinforced aluminum matrix (CF/Al) composite should be covered with a
corrosion-resistant alloy to enable broad usage without being affected by corrosion. In this …

Combining the colloidal dispersion method with the squeeze melt infiltration technique,
aluminum matrix composites with different volume fractions of silicon carbide fiber were …