To increase the reliability and availability of wind turbines, a new diagnosis method was
proposed for multiple open-circuit faults in the back-to-back converters of turbines using …

Microstrip line (MS) is commonly used as a calibrator for probe calibration. However, some
issues need to be addressed for high-frequency applications, such as ripple and attenuation …

Calibration for asymmetry of the simultaneously electromagnetic near-field probing system is
a good way of improving the performance of a two-port probe. The previous rotating …

Dual probe is capable of simultaneously measuring electric and magnetic fields in the same
position, given that perfectly symmetric design is realized on the transmission paths …

The frequency response and sensitivity of a near-field probe can be improved by using a low-
noise amplifier (LNA). In this communication, a broadband active dual probe with two LNAs …

In order to improve the spatial resolution of a magnetic near field probe, the design method
combining multiple ports with multiple production processes has been proven effective …

Strict symmetry limits the application of the differential port (diff-port) magnetic field probing
system (DMPS). Asymmetric calibration is very meaningful for DMPS. Ultrawindband …

This paper develops an active magnetic near field probe (H‐field probe) by using a four‐
layer printed circuit board (PCB) technique. Two‐turn detection structure and a low noise …

In symmetric two-port probing system, the measured electromagnetic field signals can be
decoupled. However, in practical application, asymmetric problem is difficult to avoid. So …

This article proposes a noninvasive open-switch fault detection method based on the
analysis of the high-frequency signals. The faulty power switch is detected by metering the …