[HTML][HTML] Texture, elastic anisotropy and thermal stability of commercially pure titanium prepared by room temperature ECAP
Severe plastic deformation of commercially pure titanium, leading to ultrafine-grained
microstructure, can be used as an alternative to alloying to obtain better mechanical …
microstructure, can be used as an alternative to alloying to obtain better mechanical …
Development of a novel Mg–Y–Zn–Al–Li alloy with high elastic modulus and damping capacity
D Zhao, X Chen, Y Yuan, F Pan - Materials Science and Engineering: A, 2020 - Elsevier
Abstract The novel cast Mg-1.3 Y-0.8 Zn-6.4 Al-16.7 Li (at.%) alloy showed excellent
comprehensive properties including high elastic modulus of 52.9 GPa, ultra-high specific …
comprehensive properties including high elastic modulus of 52.9 GPa, ultra-high specific …
The effect of athermal and isothermal ω phase particles on elasticity of β-Ti single crystals
J Nejezchlebová, M Janovská, H Seiner, P Sedlák… - Acta Materialia, 2016 - Elsevier
Elastic constants of single crystals of metastable β-titanium alloys with particles of both
athermal and isothermal ω phase were studied by ultrasonic methods in the temperature …
athermal and isothermal ω phase were studied by ultrasonic methods in the temperature …
Elastic moduli and elastic anisotropy of cold sprayed metallic coatings
Resonant ultrasound spectroscopy is applied to analyze the elastic anisotropy of thick
copper, aluminum, titanium, and nickel coatings prepared by cold spraying and to determine …
copper, aluminum, titanium, and nickel coatings prepared by cold spraying and to determine …
Microstructure evolution and mechanical properties of Mg–Gd–Nd–Zn–Zr alloy processed by equal channel angular pressing
J Zhang, Z Kang, L Zhou - Materials Science and Engineering: A, 2015 - Elsevier
Abstract A cast Mg–2.9 Gd–1.5 Nd–0.3 Zn–0.3 Zr alloy was processed by equal channel
angular pressing at 375° C for 1, 4 and 8 passes. Microstructure, texture and mechanical …
angular pressing at 375° C for 1, 4 and 8 passes. Microstructure, texture and mechanical …
Dislocation damping and defect friction damping in magnesium: molecular dynamics study
In this study, the molecular dynamics method was used to study the damping mechanism in
Mg alloys at the atomic scale. The energy dissipated by the nucleation and motion of …
Mg alloys at the atomic scale. The energy dissipated by the nucleation and motion of …
Effect of ECAP process on deformability, microstructure and conductivity of AA5083 under thermal effect
N Singh, MK Agrawal - MATEC Web of Conferences, 2024 - matec-conferences.org
An alternate method of alloying is to use extreme plastic deformation on commercially
available AA5083 to generate an ultrafinegrained microstructure. The objective of this …
available AA5083 to generate an ultrafinegrained microstructure. The objective of this …
Elasticity and internal friction of magnesium alloys at room and elevated temperatures
Elastic moduli (Young's modulus, shear modulus and bulk modulus) of three ultrafine-
grained Mg-based alloys AZ31, AE42 and LAE442 were studied by resonant ultrasound …
grained Mg-based alloys AZ31, AE42 and LAE442 were studied by resonant ultrasound …
Frequency-dependent acoustic energy focusing in hexagonal ceramic micro-scaffolds
T Grabec, M Koller, P Sedlák, A Kruisová… - Wave Motion, 2020 - Elsevier
Acoustic properties of an additive-manufactured SiC scaffold with hexagonal symmetry
fabricated by the robocasting method are studied both numerically and experimentally. The …
fabricated by the robocasting method are studied both numerically and experimentally. The …
Continuous measurement of m-parameter for analyzing plastic instability in a superplastic ultra-fine grained magnesium alloy
In this paper, the superplastic properties of ultra-fine grained AZ31 Mg alloy prepared by
ECAP are investigated. Ultra-fine grained materials (UFG) often exhibit superplastic …
ECAP are investigated. Ultra-fine grained materials (UFG) often exhibit superplastic …