Influence of texture on Hall–Petch relationships in an Mg alloy
Y Wang, H Choo - Acta materialia, 2014 - Elsevier
The influence of changes in crystallographic texture on the Hall–Petch (H–P) relationship for
an Mg alloy was investigated. First, the texture variations were facilitated by changing the …
an Mg alloy was investigated. First, the texture variations were facilitated by changing the …
Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction
A FeCoCrNiMo 0.23 high entropy alloy was processed by powder metallurgy with two
conditions: hot extruded and annealed. In situ neutron diffraction, together with electron …
conditions: hot extruded and annealed. In situ neutron diffraction, together with electron …
Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions
Abstract Effect of dynamic recrystallization (DRX) on the grain refinement and texture
modification was studied by conducting a series of hot compression on AZ31B Mg alloy …
modification was studied by conducting a series of hot compression on AZ31B Mg alloy …
[PDF][PDF] 3D mapping of crystallographic phase distribution using energy-selective neutron tomography
DOI: 10.1002/adma. 201400192 or limited to the surface or to small-sized specimens.
Diffraction contrast tomography [4] and 3D-XRD,[2] as employed at synchrotron sources, use …
Diffraction contrast tomography [4] and 3D-XRD,[2] as employed at synchrotron sources, use …
Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting
Theta-shaped specimens were additively manufactured out of Inconel 718 powders using
an electron beam melting technique, as a model complex load bearing structure. Two …
an electron beam melting technique, as a model complex load bearing structure. Two …
Suppression of twinning and phase transformation in an ultrafine grained 2 GPa strong metastable austenitic steel: Experiment and simulation
An ultrafine-grained 304 austenitic 18 wt.% Cr–8 wt.% Ni stainless steel with a grain size
of∼ 270 nm was synthesized by accumulative rolling (67% total reduction) and annealing …
of∼ 270 nm was synthesized by accumulative rolling (67% total reduction) and annealing …
A promising CoFeNi2V0. 5Mo0. 2 high entropy alloy with exceptional ductility
A novel high entropy alloy with the composition of CoFeNi 2 V 0.5 Mo 0.2, shows unusual
strain hardening ability and an excellent combination of ductility and strength. Especially at …
strain hardening ability and an excellent combination of ductility and strength. Especially at …
Lean duplex TRIP steel: Role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning
Constitutive micromechanical behavior of transformation induced plasticity (TRIP) stainless
steel (SS) alloys was investigated using high-energy synchrotron x-ray diffraction (S-XRD) …
steel (SS) alloys was investigated using high-energy synchrotron x-ray diffraction (S-XRD) …
In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel
To inform the design of superior transformation-induced plasticity (TRIP) steels, it is
important to understand what happens at the microstructural length scales. In this study …
important to understand what happens at the microstructural length scales. In this study …
Micromechanics and microstructure evolution during in situ uniaxial tensile loading of TRIP-assisted duplex stainless steels
Transformation-induced plasticity (TRIP) assisted duplex stainless steels, with three different
stabilities of the austenite phase, were investigated by synchrotron x-ray diffraction …
stabilities of the austenite phase, were investigated by synchrotron x-ray diffraction …