The aim of this paper is investigation of microstructure and property relationship in aluminum–
HSLA steel and aluminum–dual phase steel bimetals fabricated by explosive welding …

The microstructural features and overlap shear strength properties of friction stir spot welds
made between Al 6111 and low carbon steel, and between Mg alloy AM60 and DP600 dual …

This paper aims to evaluate the martensite morphologies and volume fractions of dual-
phase (DP) X70 microstructure (ferrite+ martensite) using the Magnetic Barkhausen Noise …

Abstract The manufacturing of Dual-Phase steels includes as a crucial step the annealing of
a cold-rolled ferrite-pearlite (F/P) microstructure, which involves numerous and interacting …

In this work an investigation was conducted into the cold deformation ageing susceptibility of
a carbon steel and a microalloyed steel, both with dual phase micro-structure. Ageing …

The effects of some intercritical annealing parameters including heating rate, soaking
temperature, soaking time, and quench media on the microstructure and mechanical …

In this study, corrosion behaviors of boronized and non-boronized dual-phase steel were
investigated with Tafel extrapolation and linear polarization methods in a 3.5 wt.% NaCl …

The phase transformation kinetics under continuous cooling conditions for intercritical
austenite in a cold rolled low carbon steel were investigated over a wide range of cooling …

The aim of this study was to evaluate the fracture toughness of resistance spot welded
(RSW) lap joints of galvanized DP600 steels. RSW lap joints galvanized DP600 steel sheets …

In the present study, an unalloyed ductile iron containing Fe–3· 50C–2· 63Si–0· 318Mn–
0.047 Mg (wt-%) were intercritically austenitised (partially austenitised) in two phase region …