Additive Manufacturing (AM), typically known as three-dimensional (3D) printing has paved
the way for fabrication of individualized products. Since 3D-printed composites show a …

Multi-walled carbon nanotubes (MCNT) are widely employed to modify the bitumen due to
their excellent properties. However, there is limited research on using MCNT to accelerate …

In the last few years two types of tests have been proposed to estimate cracking resistance
of asphalt mixtures at intermediate temperatures. The Semi-Circular Bending Illinois …

Microwave heating technology could heal micro-cracks caused by freeze-thaw (FT) cyclic
damage. The main objectives were to recommend the optimum heating moment and …

The effects of compaction process, mixture type and environmental conditions on mode I
cracking resistance of asphalt concrete (AC) materials was investigated experimentally. To …

This paper presents an investigation on the low-temperature properties of asphalt mixture
determined with the indirect tensile (IDT) and the semi-circular bending (SCB) experimental …

Racking in asphalt pavements has always been the leading cause of pavement damage.
This study aims at investigating the effects of mesostructure characteristics of asphalt mixture …

Cohesive zone model (CZM) has gained considerable attention to investigate the fracture
mechanism of asphalt mixture. The parameter of CZM was generally determined through …

Opening mode fracture behavior of asphalt mixture is studied experimentally and
theoretically using three full disk‐shaped specimens, namely, edge‐notched disk bend …

In the present study, the effects of adding fibers and Reclaimed Asphalt Pavement (RAP) on
the low temperature performances of open graded asphalt mixtures for surface layer and …