Nisingle bondCo alloy electrodeposits have been widely employed in industry due to their
good corrosion and wear resistance, high mechanical strength, moderate thermal …

Coatings with good mechanical, wear, erosion and corrosion protection properties are
needed to protect the structural metals such as steels, which are enormously used in several …

The main purpose of the present work is to study the influence of current density, deposition
mode and the presence of saccharin as an additive on the microstructure, sulfur content …

In this paper, the oxidative self-polymerization and ionization reactions of dopamine were
used to modify the surface of nanoparticle cBN to obtain a cationic nanoparticle DRcBN+ …

Cobalt (Co) and graphene oxide/cobalt (GO/Co) composite coatings were fabricated by
pulse electrodeposition technique from an aqueous bath containing cobalt sulfate and GO …

Li dendrites are considered as the primary cause for degradation and inevitable short circuit
in lithium-metal batteries (LMBs). Although contemporary strategies have shown potential for …

Abstract In this study, Ni–Co–P multilayer coatings were deposited using pulse reverse
current. Alternative Co/P-rich and Co/P-poor layers were fabricated by alternation of …

The codeposition behavior of Co (II) and Ni (II) in 1-ethyl-3-methylimidazolium bisulfate
([EMIM] HSO 4) ionic liquid (IL) and ethylene glycol (EG) system is recorded using cyclic …

The microhardness values of the anomalously electrodeposited nanocrystalline Nickel-
Cobalt (eNiCo) alloys reported in the literature varies in the range of 290 HV-700 HV, where …

Building a sustainable future requires new, accessible, economic, and ecological methods
of preparing nanostructured materials used in biomedical and environmental applications. In …