Conventional mineral based fluids are being widely used as coolants and lubricants in
machining operations throughout the world. However, these cutting fluids are the viable …

The cooling applications in machining operations play a very important role and many
operations cannot be carried out efficiently without cooling. Application of a coolant in a …

In this study, effects of drilling parameters and cryogenic treatment, which were applied to
the cutting tool (M35 HSS drill bit), on the burr width, surface roughness (Ra), chip formation …

Nickel-titanium (NiTi) alloy has been extensively researched in endodontics, particularly in
cleaning and shaping the root canal system. Research advances have primarily focused on …

Microstructure, hardness and wear behavior of AISI D2 steel subjected to varied sub-zero
treatments have been examined with reference to conventional heat treatment. Part I of this …

This article correlates laboratory-based understanding in machining of titanium alloys with
the industry based outputs and finds possible solutions to improve machining efficiency of …

The most well-known and widely used non-traditional manufacturing method is electrical
discharge machining (EDM). It is well-known for its ability to cut rigid materials and high …

The quality of drilled holes in aluminium alloys used in the aerospace industry is vital to
ensure high-precision structural integrity. For this reason, optimum selection of cost-effective …

This paper focuses on the effects of low temperature (subzero) treatments on microstructure
and mechanical properties of H13 hot work tool steel. Cryogenic treatment at− 72° C and …

The H13 steel was formed by selective laser melting process, and the as-deposited samples
were cryogenically treated at-196° C and tempered at a low temperature of 200° C …