The hardness of additively manufactured alloys
The rapidly evolving field of additive manufacturing requires a periodic assessment of the
progress made in understanding the properties of metallic components. Although extensive …
progress made in understanding the properties of metallic components. Although extensive …
Solidification, α-Al morphologies, and tensile properties of low-Sc modified Al-Mg alloys
AT Nunes, GL de Gouveia, JE Spinelli - Materials Characterization, 2023 - Elsevier
Al alloys are very attractive in engineering applications that require a combination of low
density and mechanical strength, such as in aeronautical and aerospace industry devices …
density and mechanical strength, such as in aeronautical and aerospace industry devices …
Influence of the solution and artificial aging treatments on the microstructure and mechanical properties of die-cast Al–Si–Mg alloys
HJ Kang, JY Park, YS Choi, DH Cho - Metals, 2021 - mdpi.com
Heat treatment is widely used to improve the properties of Al–Si–Mg alloys and its outcomes
are influenced by the parameters applied during the treatment. This study describes the …
are influenced by the parameters applied during the treatment. This study describes the …
[HTML][HTML] Influence of Al grain structure on Fe bearing intermetallics during DC casting of an Al-Mg-Si alloy
S Kumar, KAQ O'Reilly - Materials Characterization, 2016 - Elsevier
Abstract 207 mm diameter direct chill (DC) cast billets of 6063 aluminium-magnesium-silicon
(Al-Mg-Si) alloy were produced with various different primary aluminium (α-Al) grain …
(Al-Mg-Si) alloy were produced with various different primary aluminium (α-Al) grain …
Investigation on machinability in turning of as-cast and T6 heat-treated Al-(3, 7, 12%) Si-0.6% Mg alloys
PAB Machado, JM do Vale Quaresma, A Garcia… - Journal of Manufacturing …, 2022 - Elsevier
The machinability in turning of Al-Si-Mg alloys under as-cast and heat-treated conditions has
been investigated. Three alloys with 3%, 7% and 12% Si and 0.6% Mg contents (wt%) were …
been investigated. Three alloys with 3%, 7% and 12% Si and 0.6% Mg contents (wt%) were …
Microstructure and synergistic reinforcing activity of GNPs-B4C dual-micro and nano supplements in Al-Si matrix composites
The aim of this study is to investigate the mechanical effect of graphene nanoparticles and
boron carbide microparticles together on Al-17Si alloy. For this purpose, graphene …
boron carbide microparticles together on Al-17Si alloy. For this purpose, graphene …
Microstructure features and mechanical/electrochemical behavior of directionally solidified Al− 6wt.% Cu− 5wt.% Ni alloy
The effects of the addition of 5.0 wt.% Ni to an Al− 6wt.% Cu alloy on the solidification
cooling rate T˙ growth rate (VL), length scale of the representative phase of the …
cooling rate T˙ growth rate (VL), length scale of the representative phase of the …
Transient directional solidification of a eutectic Al–Si–Ni alloy: Macrostructure, microstructure, dendritic growth and hardness
Abstract The Al-11 wt% Si-5 wt% Ni eutectic alloy was directionally solidified (DS) under
transient heat flow conditions at cooling rates in a range of about 1–25° C/s along the length …
transient heat flow conditions at cooling rates in a range of about 1–25° C/s along the length …
Microstructure and tensile/corrosion properties relationships of directionally solidified Al–Cu–Ni alloys
Abstract Al–Cu–Ni alloys are of scientific and technological interest due to high strength/high
temperature applications, based on the reinforcement originated from the interaction …
temperature applications, based on the reinforcement originated from the interaction …
Microstructure and tensile strength of an Al-Si-Fe-V alloy: vanadium and solidification thermal parameters as recycling strategies
One of the greatest challenges facing the recycling of Al-based alloys is handling Fe
incorporation. The formation of Fe-rich phases has negative impacts on the mechanical …
incorporation. The formation of Fe-rich phases has negative impacts on the mechanical …