The high-cycle fatigue (HCF) properties and deformation behavior of additively
manufactured equiatomic CoCrFeMnNi high-entropy alloys (HEAs), strengthened by in-situ …

In this work, the effect of laser shock peening (LSP) treatment on fatigue property of
aluminized AISI 321 stainless steel was studied. The high fraction twinning and compressive …

In this research, 12CrNi2 low alloy steel was successfully prepared by laser melting
deposition (LMD). The mechanisms driving high cycle fatigue fracture of the as-built LMD …

Rotating bending fatigue tests, together with microstructural characterization, have been
performed on the high nitrogen martensite bearing steel Cronidur30. The results show that …

Abstract Changes in cutting parameters can cause changes in surface integrity and affect
fatigue life. In this paper, the surface integrity and fatigue life of 2024 aluminum alloy were …

We have studied here the high cycle fatigue properties and sub-surface fatigue crack
initiation mechanism in advanced bainitic steel subjected to conventional bainitic …

The microstructural features underneath the fracture surfaces of high-strength alloys
experienced very-high-cycle fatigue were further investigated to show the nanograin layer in …

The present study envisaged the behavior and relevant crack initiation mechanism of super
martensitic stainless steel (0Cr13Ni5Mo) at elevated temperature (ET) under very‐high …

The microstructure, mechanical and wear behavior of a high chromium cast iron were
studied at different normalizing temperatures (950° C, 1000° C, 1050° C, 1100° C). The …

Heat-affected zones (HAZs) in real welds are usually quite narrow, and consequently most
standard mechanical tests are difficult or even impossible. Therefore, simulated …