Cutting fluid plays a cooling-lubrication role in the cutting of metal materials. However, the
substantial usage of cutting fluid in traditional flood machining seriously pollutes the …

Titanium alloys are widely used in aerospace, biomedical, and other engineering areas due
to their superior properties. However, machining of titanium alloys has always been a …

Government legislation and public opinion are the main drivers behind the movement of
manufacturing companies towards sustainable production. Fundamentally, companies want …

The paper analyses the influence of emulsion mist formation parameters and the nozzle
distance from the tool–chip interface, on the droplet velocity at the nozzle outlet, on active …

Titanium alloys are generally known as difficult-to-machine materials because of their low
machinability ratings. Their usage is favored for demanding sectors because of their high …

Minimum quantity lubrication (MQL) in metal cutting helps enhancing machinability while
ensuring sustainability. In the absence of bulk heating in micro-milling, the cutting fluid …

When drilling the superalloy Inconel 718 twist drills are faced with high thermomechanical
loads. Owing to the low thermal conductivity of the workpiece material a large amount of the …

A novel single-channel supply of pre-mixed (a) liquid carbon dioxide (LCO 2) and (b) oil–
delivered via minimum quantity lubrication (MQL)–represents a significant advancement in …

Abstract A Cu-based Al 2 O 3 ceramic cenosphere porous abrasive ring with phyllotactic
pattern was fabricated and assembled into the internal cooling wheel, aiming to the …

The insufficient infiltration of cutting fluid at the tool-chip contact interface during machining
poses a substantial challenge to achieving clean and efficient cutting processes. Key to …