Multiple jet impingement− a review

B Weigand, S Spring - … symposium on heat transfer in gas …, 2009 - dl.begellhouse.com
ABSTRACT A review on the heat transfer characteristics of systems of multiple impinging air
jets is presented. The objective is to provide profound physical knowledge for the design of …

Digital particle image thermometry/velocimetry: a review

D Dabiri - Experiments in Fluids, 2009 - Springer
Digital particle image thermometry/velocimetry (DPIT/V) is a relatively new methodology that
allows for measurements of simultaneous temperature and velocity within a two-dimensional …

Effect of effusion hole arrangement on jet array impingement heat transfer

WW Choi, SM Kim - International Journal of Heat and Mass Transfer, 2022 - Elsevier
Impingement/effusion cooling systems have been studied extensively over the past few
decades to constantly improve cooling performance as the turbine inlet temperature of …

Convective heat transfer for multiple rows of impinging air jets with small jet-to-jet spacing in a semi-confined channel

S Yong, Z Jing-zhou, X Gong-nan - International Journal of Heat and Mass …, 2015 - Elsevier
The effects of jet-to-jet pitch ratios in both streamwise and spanwise directions (xn/d and
yn/d, ranged from 2 to 5), jet-to-target spacing ratio (zn/d, ranged from 2 to 4) and jet array …

Experimental and numerical investigation of narrow impingement cooling channels

S Fechter, A Terzis, P Ott, B Weigand… - International Journal of …, 2013 - Elsevier
Impingement cooling effectiveness of gas turbine vanes and blades can be further increased
due to the manufacturing feasibility of integrally cast airfoils which can provide narrow …

Experimental investigation of local heat transfer distribution on smooth and roughened surfaces under an array of angled impinging jets

LA El-Gabry, DA Kaminski - 2005 - asmedigitalcollection.asme.org
Measurements of the local heat transfer distribution on smooth and roughened surfaces
under an array of angled impinging jets are presented. The test rig is designed to simulate …

Film cooling effectiveness for an advanced-louver cooling scheme for gas turbines

XZ Zhang, I Hassan - Journal of Thermophysics and Heat Transfer, 2006 - arc.aiaa.org
MODERN gas turbine engines typically operate with inlet temperatures of 1800–2000 K,
which is far beyond the allowable metal temperature. Film cooling is extensively used to …

Numerical investigation on the heat transfer performance of array jet impingement cooling with sinusoidal-corrugated target plate

G Li, C Liu, T Guo, F Zhang, C Yao, X Li - Applied Thermal Engineering, 2024 - Elsevier
Array jet impingement cooling is a prevalent method for the thermal management of high-
pressure turbine guide vanes. Nevertheless, cooling efficiency is often compromised by the …

Heat transfer and flow structure characteristics of film-cooled leading edge model with sweeping and normal jets

X Kong, Y Zhang, G Li, X Lu, J Zhu, J Xu - International Communications in …, 2022 - Elsevier
The heat transfer and flow structure characteristics of a film-cooled leading edge model with
sweeping and normal jets were numerically investigated using the conjugate heat transfer …

The effect of initial cross flow on the cooling performance of a narrow impingement channel

AC Chambers, DRH Gillespie… - J. Heat …, 2005 - asmedigitalcollection.asme.org
Impingement channels are often used in turbine blade cooling configurations. This paper
examines the heat transfer performance of a typical integrally cast impingement channel …