Pore characteristics and their effects on the material properties of foamed concrete evaluated using micro-CT images and numerical approaches
Foamed concrete contains numerous pores inside the material, and these pores are a
significant factor determining the material characteristics. In particular, the pore distribution …
significant factor determining the material characteristics. In particular, the pore distribution …
Deformation failure mechanism and constitutive model of gradient aluminum foam under impact loading
X Liu, Y Wang, X He, H Liu, S Cao - Composite Structures, 2024 - Elsevier
The dynamic mechanical response and energy absorption characteristics of gradient
aluminum foam under impact loading with strain rates of 150 s− 1, 340 s− 1, and 550 s− 1 …
aluminum foam under impact loading with strain rates of 150 s− 1, 340 s− 1, and 550 s− 1 …
Additive manufacturing of packings for rotating packed beds
K Gładyszewski, M Skiborowski - Chemical Engineering and Processing …, 2018 - Elsevier
HIGEE technology and rotating packed beds (RPB) in specific, gained a lot of interest for
industrial processes intensification in recent years. Yet, most of the investigations were …
industrial processes intensification in recent years. Yet, most of the investigations were …
Fabrication of aluminum foams with small pore size by melt foaming method
This article introduces an improvement to the fabrication of aluminum foams with small pore
size by melt foaming method. Before added to the melt, the foaming agent (titanium hydride) …
size by melt foaming method. Before added to the melt, the foaming agent (titanium hydride) …
Deformation behaviour of in-situ TiB2 reinforced A357 aluminium alloy composite foams under compressive and impact loading
Abstract In-situ A357-xTiB 2 (x= 5, 10 wt%) composite foams were prepared through liquid
melt route using TiH 2 as blowing agent. The deformation and energy absorption …
melt route using TiH 2 as blowing agent. The deformation and energy absorption …
Processing and characterization of in-situ TiB2 stabilized closed cell aluminium alloy composite foams
Abstract A357 (Al–7Si–0.6 Mg)-xTiB 2 (x= 5, 10 wt.%) in-situ composites processed by the
salt-melt reaction method were successfully foamed by melt processing with the addition of …
salt-melt reaction method were successfully foamed by melt processing with the addition of …
The effect of unintended porosity on the first compressive stress maximum of alumina hollow sphere-filled bimodal composite metal foams
Bimodal composite metal foams made from Al99. 5 aluminium and quasi-eutectic Sr-
modified AlSi12 matrix were investigated, where the bimodality was introduced by two …
modified AlSi12 matrix were investigated, where the bimodality was introduced by two …
The benefits of structural disorder in natural cellular solids
Structural cellular materials in nature, such as wood, trabecular bone, corals, and dentin
combine complex biological functions with structural roles, such as skeletal support and …
combine complex biological functions with structural roles, such as skeletal support and …
Numerical modeling and experimental behavior of closed-cell aluminum foam fabricated by the gas blowing method under compressive loading
V Sharma, F Zivic, N Grujovic, N Babcsan, J Babcsan - Materials, 2019 - mdpi.com
This paper deals with the experimental and numerical study of closed-cell aluminum-based
foam under compressive loading. Experimental samples were produced by the gas blowing …
foam under compressive loading. Experimental samples were produced by the gas blowing …
A novel method for contact analysis of rubber and various surfaces using micro-computerized-tomography
The experimental analysis of the contact state in a tribosystem is of great importance in the
study of contact mechanics. In order to make a realistic analysis on the micro scale, it is …
study of contact mechanics. In order to make a realistic analysis on the micro scale, it is …