Comparing the strengthening efficiency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix
The research work comprehensively evaluates and compares the strengthening efficiency of
multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs), two of the …
multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs), two of the …
Effect of particle morphology on fatigue crack propagation mechanism of TiB2-reinforced steel matrix composites
R Chen, B Li, K Xu - Engineering Fracture Mechanics, 2022 - Elsevier
Fatigue crack growth mechanisms of as-cast and hot-rolled TiB 2-reinforced steel matrix
composites (SMCs) fabricated by eutectic solidification are systematically investigated …
composites (SMCs) fabricated by eutectic solidification are systematically investigated …
Influences of particle fraction and characteristics on damage tolerance of TiB2-reinforced steel matrix composites
The deformation behaviours of two steel matrix composites (SMCs) strengthened by different
volume fractions of the TiB 2 ceramic phase were investigated in this work. When the volume …
volume fractions of the TiB 2 ceramic phase were investigated in this work. When the volume …
Revealing the fatigue crack initiation mechanism of a TiB2-reinforced steel matrix composite
The initiation of fatigue cracks in a TiB 2-reinforced high-modulus, low-density steel was
revealed by in-situ scanning electron microscopy for the first time. The results show that the …
revealed by in-situ scanning electron microscopy for the first time. The results show that the …
Experimental study and micromechanical modelling of the effective elastic properties of Fe–TiB2 composites
K Dorhmi, K Derrien, Z Hadjem-Hamouche, L Morin… - Composite …, 2021 - Elsevier
The aim of this paper is to investigate the effective properties of Fe–TiB 2 composites
obtained after hot or cold rolling. The elastic moduli of both hot and cold rolled composites …
obtained after hot or cold rolling. The elastic moduli of both hot and cold rolled composites …
[HTML][HTML] On the fatigue crack propagation mechanism of a TiB2-reinforced high-modulus steel
The fatigue crack propagation mechanism of a TiB 2-reinforced high-modulus steel
fabricated by eutectic solidification process was investigated for the first time. The fatigue …
fabricated by eutectic solidification process was investigated for the first time. The fatigue …
Synchrotron X-ray diffraction studies of the internal load transfer in Ni–CrC metal matrix composites
Strengthening in metal matrix composites (MMCs) is primarily due to the load transfer from
the compliant matrix to the stiff reinforcement. While internal load transfer has been studied …
the compliant matrix to the stiff reinforcement. While internal load transfer has been studied …
Fabrication and characterization of steel-base metal matrix composites reinforced by yttria nanoparticles through friction stir processing
Friction Stir Processing (FSP) was used to fabricate metal matrix composite, based on steel
and reinforced with nano-sized yttrium oxide powder. The powder was packed in a narrow …
and reinforced with nano-sized yttrium oxide powder. The powder was packed in a narrow …
Experimental analysis and modeling of mixed hardening of Steel Matrix Composites under monotonic and reverse simple shear loading: Application to SPIF process
M Dammak, A Bouhamed, H Jrad - Mechanics of Advanced …, 2024 - Taylor & Francis
This study explores the distinctive characteristics of Steel Matrix Composites (SMCs)
reinforced with TiB2, concentrating on their hardening behavior during simple shear tests …
reinforced with TiB2, concentrating on their hardening behavior during simple shear tests …
Fabrication and analysis of metal matrix composites: A state of the art review
Composite materials are of interest since many years as they are used in numerous
engineering fields. Metal matrix composites are also studied from fabrication and analysis …
engineering fields. Metal matrix composites are also studied from fabrication and analysis …