This review focuses on lightweight materials (foams, aerogels, cryogels, xerogels) obtained
from lignocellulosic fibres, nanocelluloses, and regenerated celluloses, in which the dried …

Aqueous foam can be used as a transfer medium to form lightweight materials from natural
and man-made fibers together with other types of raw materials. This review discusses …

The non-degradability of plastic foam and limited petroleum resources have caused great
damage to the ecological environment of the earth. Here a bio-based foam was fabricated to …

In recent years, the application scope of most cellulose-based foams is limited due to their
low adsorbability and poor recyclability. In this study, a green solvent is used to extract and …

There are two parts to the interaction of foam with porous media. How the foam interacts with
the surface and the flow within the substrate, which is the focus of this review. Flow-through …

Three size-fractionated samples of pine beetle-killed wood particles were used to prepare
lightweight insulative foams. The foams were produced by foam-forming an aqueous slurry …

Biodegradable cellulosic pulp foams with robustness and water resistance are urgently
needed in nowadays to replace petroleum-based plastic foams for environmental …

The goal of the 2015 Paris Climate Change Agreement is to limit global warming to 1.5 C. To
reach this goal, climate neutrality must be achieved by mid-century (Paris Agreement 2015) …

We consider theoretically the two-dimensional flow in a vertically aligned thick liquid film
supported at the top and bottom by wire frames. The film gradually thins as the liquid drains …

In the thesis, the morphology of cellulose-based fibre surfaces immersed in water and their
interactions with air bubbles in the presence of surfactants were investigated. The cellulose …