Rutting is the major distress mode in flexible pavements occurring due to the repeated
movement of traffic loading. Deformation in the pavements comprise of both recoverable …

Geomaterials exhibit elastoplastic behaviour during dynamic and repeated loading
conditions. These loads are induced by the passage of a train or vehicle which then …

Gain a stronger foundation with optimal ground improvement Before you break ground on a
new structure, you need to analyze the structure of the ground. Expert analysis and …

Pavements are omnipresent in our society. From roads and airports to parking lots and
driveways, every civil engineering project requires applications of this complex subject …

Recycling and the reuse of waste materials as a replacement for the traditional construction
materials in building and civil infrastructure is a significant step to reduce greenhouse gas …

Large-scale cubical triaxial tests were conducted to investigate the behavior of reinforced
and unreinforced subballast under cyclic load. Granular material with an average particle …

There is limited research on the dynamic behaviour of soils reinforced with polypropylene
(PP) fibres and a scarcity of literature on using PP fibres to improve the mechanical …

In laboratory testing of asphalt mixtures, the relationship between the number of load
repetitions and permanent deformation has been found to include three distinct stages …

Pavement layers must be sufficiently strong to carry all traffic loads and resist the
accumulation of permanent deformations such as rutting and avoid premature failures …

The objective of this study is to propose a machine learning-based framework for predicting
the permanent strain accumulation of unbound aggregates. To develop the machine …