Affordable and clean energy stands as a key component within the realm of sustainable
development. As an integral stride toward sustainability, substantial endeavors have been …

Aluminum-based alloys have been considered candidate materials for cathodic protection
anodes. However, the Al-based alloys can form a layer of alumina, which is a drawback in a …

The purpose of this study was to determine the effect of titanium reinforcement on the
microstructure and mechanical properties of an Al-Zn-Mg-Cu alloy matrix composite. The …

In this manuscript, the influence of gallium content additions of Al-Zn-In-Mg alloy was
investigated through electrochemical techniques and microstructure observation in 3.5 wt …

A range of Al-Zn-Mg-In-Ti-Sn sacrificial anode alloys were designed and prepared, and the
effects of In, Sn and Ti elements on the microstructure, self-corrosion and discharge …

The cooling curves of the Al–Zn–In–Mg–Ag alloys in copper mold, iron mold, and 400° C-
preheated iron mold cast were simulated and three solidification rates were calculated to be …

In this study, effects of heat treatment on microstructure, hardness and corrosion behaviour
of Al based eutectic alloy systems directionally solidified at different growth rates were …

Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and
microstructure characterization were performed on directionally solidified samples of the Al …

The life cycle of Brachylaima llobregatensis n. sp.(Trematoda: Brachylaimidae) is elucidated.
Embryonated, operculated, asymmetric eggs (30.9× 18.2 μm) are eliminated with feces of …

This study investigates the effect of 0.1% scandium (Sc) and 2.2% lithium (Li) additions on
the microstructure and electrochemical behavior of 7075 aluminum alloys. Samples were …