At present aluminium-magnesium alloys are widely used in various engineering
applications due to its light weight and superior properties. Joining is considered as one of …

Friction stir welding (FSW) exhibit high rate of plastic deformation thereby microstructure
modification through intense coarsening and grain boundary precipitation found in the weld …

High-throughput calculations/simulations are the prerequisite for the efficient design of high-
performance materials. In this paper, a machine learning accelerated distributed task …

Precipitation-strengthening at ambient and high temperatures is examined in Al-0.5 Mn-0.3
Si (at.%) alloys with and without 0.02 at.% Sn micro-additions. Isochronal aging experiments …

Typically, steel is protected from corrosion by employing sacrificial anodes or coatings
based on Zn, Mg, Al or Cd. However, stricter environmental regulations require new …

In this paper, an efficient design of a Ti-modified Al-Si-Mg-Sr casting alloy with
simultaneously enhanced strength and ductility was achieved by integrating computational …

This study delves into the investigation of intermetallic compounds, specifically Al 3 Ni, Al 3
Sn, Al 2 Cu, Ni 3 Al, and their formation during the alloying additions and heat treatment …

The aim of the work was to explore the possibility of producing Sn-bearing composite phase
change materials (C-PCMs) intended to be used as Latent Heat Thermal Energy Storage …

Gallium-based liquid metals (GLMs) are a novel high-end lubricant with low friction
coefficient and excellent load-carrying capacity. This paper aims to improve the lubrication …

In this work, the microstructural evolution and mechanical behavior of as-cast Al–5Mg alloys
with various tin (Sn) contents were investigated. Combined with microstructure …