Quasicrystalline materials constitute a new materials group with certain crystalline structural
characteristics, such as the generation of Bragg peaks in the X-ray data and points in the …

Amorphous alloys, and the partially or fully crystallised materials derived from them, can
have properties attractive for a diverse range of applications. In some cases, their wear …

Quasicrystals are a relatively new class of materials which exhibit unusual atomic structure
and useful physical and chemical properties. The inherent brittleness of quasicrystals has …

Preliminary cold spray trials have been performed using gas-atomized Al-Cr-Mn-Co-Zr alloy
powder, which exhibits a nanocomposite structure with an Al matrix and 35 vol% of …

The influence of mechanical milling (MM), primarily on microstructure and phase evolution in
Al 62.5 Cu 25 Fe 12.5 (at%) quasicrystalline (IQC) matrix reinforced with varying volume …

In this study, the effects of processing parameters on the microstructure of Al-Cu-Fe-Cr
quasicrystalline (QC) coatings fabricated by selective laser melting (SLM) are investigated. A …

A Nd: glass laser with pulse duration of 250fs and 1.3 ps has been used to evaporate a
Al65Cu23Fe12 quasicrystalline target. The gaseous phase obtained from the ablation …

In the present investigation efforts were made to study mechanically driven structural
transformation in Sn reinforced Al–Cu–Fe icosahedral quasicrystalline (IQC) matrix …

The last decade has witnessed an intensive research in the field of nanocrystalline materials
due to their enhanced properties. A lot of processing techniques were developed in order to …

Quasicrystalline (QC) powder was prepared by mechanical alloying and subsequent
annealing of Al 65 Cu 23 Fe 12 composition. Obtained quasicrystals were milled together …