Deformation behavior of Mg-13Gd-4Y-2Zn-0.5 Zr alloy on the basis of LPSO kinking, dynamic recrystallization and twinning during compression-torsion

W Xu, J Yu, L Jia, G Wu, Z Zhang - Materials Characterization, 2021 - Elsevier
In this paper, compression-torsion experiments were used to study the hot deformation
behavior of as-homogenized Mg-13Gd-4Y-2Zn-0.5 Zr alloy at 350° C under different …

[HTML][HTML] Microstructure evolution and texture tailoring of reduced graphene oxide reinforced Zn scaffold

Y Yang, Y Cheng, S Peng, L Xu, C He, F Qi, M Zhao… - Bioactive Materials, 2021 - Elsevier
Zinc (Zn) possesses desirable degradability and favorable biocompatibility, thus being
recognized as a promising bone implant material. Nevertheless, the insufficient mechanical …

[HTML][HTML] Achieving high strength-ductility synergy in Mg-6Sn-3Zn-0.3 Zr (wt.%) alloy via a combination of casting, pre-treatment and hot extrusion

T Zhou, Y Li, F Guo, Q Li, Z Jia, D Liu - Journal of Magnesium and Alloys, 2023 - Elsevier
Achieving the strength-ductility synergy in Mg alloys is a gigantic challenge, especially in
rare-earth-free Mg alloys. In this study, a new Mg-Sn-Zn-Zr alloy with high ultimate tensile …

Hot deformation behavior and processing map of a new type Mg-6Zn-1Gd-1Er alloy

B Che, L Lu, W Kang, J Luo, M Ma, L Liu - Journal of Alloys and …, 2021 - Elsevier
The hot deformation behavior of a new type Mg-6Zn-1Gd-1Er alloy was investigated in the
temperature range of 180℃–380℃ and strain rate of 10− 3 s− 1–10 s− 1 with the Gleeble …

Influence of Zn on the microstructure and mechanical properties of Mg-Gd-Zr alloy

B Lei, Z Dong, Y Yang, B Jiang, M Yuan, H Yang… - Materials Science and …, 2022 - Elsevier
Here, the microstructure and mechanical properties are investigated for the designed Mg-
4Gd-0.5 Zr-xZn (x= 0, 0.2, 0.5, 1.0 and 1.5 wt%) alloys with special emphasis on the effect of …

A simultaneous enhancement of both strength and ductility by a novel differential-thermal ECAP process in Mg-Sn-Zn-Zr alloy

T Zhou, Q Zhang, Q Li, L Wang, Q Li, D Liu - Journal of Alloys and …, 2021 - Elsevier
Equal-channel angular pressing (ECAP) technique has emerged as a desirable strategy to
fairly improve the properties of magnesium (Mg) alloys. However, poor workability of Mg …

[HTML][HTML] Influence of extrusion conditions on microstructure and mechanical properties of Mg-2Gd-0.3 Zr magnesium alloy

T Zhao, Y Hu, C Zhang, B He, T Zheng, A Tang… - Journal of Magnesium …, 2022 - Elsevier
In general, different extrusion conditions will affect the microstructure of magnesium alloys
and further determine the mechanical properties. The effects of extrusion parameters and …

[HTML][HTML] Underlying mechanisms of variation in yield asymmetry and strain hardening behavior of extruded pure Mg with Gd addition

GM Lee, SH Park - Journal of Magnesium and Alloys, 2023 - Elsevier
Abstract Effects of Gd addition on the strain hardening behavior and yield asymmetry of pure
Mg are investigated by subjecting extruded pure Mg, Mg–5Gd, and Mg–15Gd (all in wt%) to …

Experimental study and thermodynamic evaluation of Mg–La–Zn system

Q Luo, C Zhai, Q Gu, W Zhu, Q Li - Journal of Alloys and Compounds, 2020 - Elsevier
Abstract The Mg–La–Zn alloys exhibit good mechanical properties both at room and
elevated temperatures due to the formation of intermetallic compounds. However, the …

Influence of Bi addition on dynamic recrystallization and precipitation behaviors during hot extrusion of pure Mg

J Go, JU Lee, H Yu, SH Park - Journal of Materials Science & Technology, 2020 - Elsevier
Low material cost and high extrudability for ensuring price competitiveness with Al alloys, as
well as excellent mechanical properties, are essential for expanding the application range of …