Adhesive bonding is one of the most suitable joining technologies in terms of weight and
mechanical performance for current carbon fiber reinforced polymer aircraft fuselage …

The rapidly developing technique of electrospinning has gained surging research interest
since the 1990s due to its capability of yielding continuous fibers with diameters down to the …

The susceptibility to delamination is one of the main concerns in fiber reinforced polymer
composites (FRPs). This work demonstrates improvements of 60% in Mode-I fracture …

Electrospun nanofibers are very popular in polymer nanocomposites because they have a
high aspect ratio, a large surface area, and good mechanical properties, which gives them a …

Inducing electrical properties in thermoplastic materials and enhancing their mechanical
properties with the addition of nanofiller in Fused Filament Fabrication (FFF) is the main …

In the last few decades nanofibers have been developed and introduced in a vast number of
industrial and research applications. One of their most effective use is as interleaved …

The micro–nanofibers prepared by the electrospinning technique can be used as a good
container for loading healing agents. The core–shell electrospun nanofibers with …

Abstract Ultrathin CNT fiber veils (100–300 nm thick) were used as interleaves to improve
the interlaminar fracture toughness of unidirectional carbon fiber reinforced polymer …

The introduction of nanostructured interlayers is one of the most promising strategies for
interlaminar reinforcement in structural composites. In this work, we study the failure …

A major shortcoming of carbon fiber reinforced polymer composites (CFRP) is their
interlaminar performance. This study provides an inexpensive and readily scalable solution …