Ceramic materials typically have to be sintered at high temperatures, often above 1000 C.
This precludes the coating of lower-melting substrate materials, such as metals, glasses and …

A novel method for depositing ceramic thick films by aerosol deposition (AD) is presented.
Submicron ceramics particles are accelerated by gas flow up to 100–500 m/s and then …

Ceramic integration technology requires downsizing and/or improvement of device
performance in many applications, such as in the fabrication of microelectromechanical …

Polymer–ceramic composites (PCCs) are promising functional materials with applications in
energy technology, microelectronics, sensor technology, protective coatings, wastewater …

Research into microparticle impact phenomena has been conducted for a long time in fields
such as space science, high pressure physics, defense, and aerospace engineering with the …

Dense yttrium oxide film was prepared on a quartz substrate by the aerosol deposition
process at the room temperature. The deposition rate was very high, 60 m/h. Thick film of 10 …

The aerosol deposition method (ADM) is a novel coating process that works at room
temperature without a high‐temperature plasma and arc discharge, unlike the existing …

The particle impact velocity is a critical parameter in assessing deformation and particle
adhesion mechanisms that occur during the micro-cold spray process (also referred to as …

Aerosol deposition method (ADM) for shock-consolidation of fine ceramics powder to form
dense and hard layers is reported. Submicron ceramic particles were accelerated by gas …

Respiration monitoring and human sweat sensing have promising application prospects in
personal healthcare data collection, disease diagnostics, and the effective prevention of …