Coatings for automotive gray cast iron brake discs: A review
Gray cast iron (GCI) is a popular automotive brake disc material by virtue of its high melting
point as well as excellent heat storage and damping capability. GCI is also attractive …
point as well as excellent heat storage and damping capability. GCI is also attractive …
Investigations on tribological and microstructure characteristics of WC-12Co/FeNiCrMo composite coating by HVOF process
In the current study, a high-velocity oxyfuel (HVOF) system is used to generate an enhanced
temperature sliding wear-resistant iron-based (FeNiCrMo) composite coating on a boiler …
temperature sliding wear-resistant iron-based (FeNiCrMo) composite coating on a boiler …
Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process
Analysis of the sliding wear and microstructural characteristics of iron based composite
coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo …
coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo …
A Cutting‐Edge Survey of Tribological Behavior Evaluation Using Artificial and Computational Intelligence Models
SK Selvaraj, A Raj, M Dharnidharka… - … in Materials Science …, 2021 - Wiley Online Library
Any metal surface's usefulness is essential in various applications such as machining and
welding and aerospace and aerodynamic applications. There is a great deal of wear in …
welding and aerospace and aerodynamic applications. There is a great deal of wear in …
Effect of laser post-treatment on microstructural and sliding wear behavior of Hvof-sprayed NiCrC and NiCrSi coatings
In this study, NiCrC and NiCrSi coatings are deposited on the MDN 310 steel using High-
Velocity Oxy-Fuel (HVOF) process. Laser Surface Melting (LSM) post-heat treatment is …
Velocity Oxy-Fuel (HVOF) process. Laser Surface Melting (LSM) post-heat treatment is …
Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC
MR Fernández, A García, JM Cuetos, R González… - Wear, 2015 - Elsevier
This paper studies the tribological improvement of a NiCrBSi laser cladding coating
reinforced with different weight percentages of WC (0–50%) in a powder feeder. During the …
reinforced with different weight percentages of WC (0–50%) in a powder feeder. During the …
Microstructural and tribological resistance of flame-sprayed CoMoCrSi/WC-CrC-Ni and CoMoCrSi/WC-12Co composite coatings remelted by microwave energy
The hard facing composite coatings such as CoMoCrSi/30% WC-CrC-Ni and
CoMoCrSi/30% WC-12Co are coated on grade-2 titanium substrate through Flame spray …
CoMoCrSi/30% WC-12Co are coated on grade-2 titanium substrate through Flame spray …
Effect of microwave heating on microstructure and elevated temperature adhesive wear behavior of HVOF deposited CoMoCrSi-Cr3C2 coating
This research reports the improvement of high-temperature sliding wear resistance of a
grade 15 titanium alloy protected by an HVOF sprayed CoMoCrSi-Cr 3 C 2 coating. The …
grade 15 titanium alloy protected by an HVOF sprayed CoMoCrSi-Cr 3 C 2 coating. The …
High temperature wear resistance of laser cladding NiCrBSi and NiCrBSi/WC-Ni composite coatings
C Guo, J Zhou, J Chen, J Zhao, Y Yu, H Zhou - Wear, 2011 - Elsevier
NiCrBSi coating and NiCrBSi/WC-Ni composite coating were produced on stainless steel by
laser cladding. The friction and wear behavior of the laser cladding coatings sliding against …
laser cladding. The friction and wear behavior of the laser cladding coatings sliding against …
Characterization and sliding wear behavior of iron-based metallic coating deposited by HVOF process on low-carbon steel substrate
The main aim of this work is to improve the sliding wear resistance of boiler steel material.
The iron-based or Metco 41C metallic feedstock was deposited over the ASTM-SA213-T11 …
The iron-based or Metco 41C metallic feedstock was deposited over the ASTM-SA213-T11 …