For inner-hole parts, the main positions bearing load are their inner walls, which are prone
to strain, wear, corrosion and other damages during use. Aluminum‑silicon (Alsingle bondSi) …

The two directional microstructure and multiple mechanical properties of the AlSi7Mg ribbon
produced by melt-spun were investigated by optical microscopy (OM), field emission gun …

The mechanical properties of the Al-7075 material, which is used in important areas such as
automotive, aviation and defense industry, are still being studied by researchers. In this …

Abstract Rapidly solidified Al-27wt.% Si hypereutectic alloy was fabricated by gas
atomization, and its characterization as a function of particle size was investigated. A …

The effect of overheating on the morphological evolution of primary silicon in undercooled Al–
70% Si-0.5% RE alloys was investigated by observing and recording their growth processes …

Have been investigated the influence of annealing on the physicochemical properties of
amorphous alloys based on aluminum. It has been established that: after annealing during …

The reverse indentation load-size effects of Fe–Mn–Si and Co–Mn–Si superalloy have been
investigated by measuring Vickers hardness. The characterized superalloy samples are …

In this work, rapidly solidified hypereutectic Al–20Si–5Fe–XV (X= 0, 0.5 and 1) alloys were
fabricated by melt spinning under vacuum. Microstructural and spectroscopic analyses were …

The microstructural evolution of drop-tube processed Al-4.1 wt.% Fe-1.9 wt.% Si alloy
powders has been analysed. X-ray diffraction shows that, irrespective of the cooling rate, the …

In this study, the effects of different production methods like melt spinning, high-energy ball
milling, and combined melt spinning and high-energy ball milling on the mechanical and …