Structural evolutions of metallic materials processed by severe plastic deformation

Y Cao, S Ni, X Liao, M Song, Y Zhu - Materials Science and Engineering: R …, 2018 - Elsevier
Abstract Bulk nanostructured (ns)/ultrafine-grained (UFG) metallic materials possess very
high strength, making them attractive for high strength, lightweight and energy efficient …

Super and hyper duplex stainless steels: structures, properties and applications

G Chail, P Kangas - Procedia Structural Integrity, 2016 - Elsevier
In oil-gas industry, the exploration and development are now targeted to the deep reservoirs
with high pressures, high temperatures and extreme corrosive environments. This requires …

Texture, misorientation and mechanical anisotropy in a deformed dual phase stainless steel weld joint

R Badji, T Chauveau, B Bacroix - Materials Science and Engineering: A, 2013 - Elsevier
The deformation behavior of a duplex stainless steel weld joint is studied. A detailed texture
analysis shows that the increase of the deformation percentage leads to a reinforcement of …

Deformation incompatibility enables hetero-deformation induced strengthening in Ti/Nb laminates

S Jiang, R Lin Peng, X Zhao, L Zuo… - Materials Research …, 2023 - Taylor & Francis
ABSTRACT Deformation incompatibility in Ti/Nb laminates under uniaxial tension was
revealed by in-situ neutron diffraction. During uniform deformation of the bulk laminates, the …

Multi-scale study on the heterogeneous deformation behavior in duplex stainless steel

X Zhang, P Wang, D Li, Y Li - Journal of Materials Science & Technology, 2021 - Elsevier
The heterogeneous deformation behavior of austenite and ferrite in the 2205 duplex
stainless steel was subjected to multiscale analysis based on the in situ synchrotron-based …

Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement …

Y Li, W Li, JC Hu, HM Song, XJ Jin - International journal of plasticity, 2017 - Elsevier
Two duplex TRIP-assisted stainless steels have been investigated showing distinct γ (face
centered cubic)→ ε (hexagonal close-packed)→ α′(body centered cubic) transformation …

Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling

N Jia, RL Peng, YD Wang, S Johansson, PK Liaw - Acta Materialia, 2008 - Elsevier
Microscopic incompatibility-induced stresses in a duplex stainless steel undergoing plastic
deformation are elucidated using a visco-plastic self-consistent model. The model considers …

Deformation mechanisms of a 20Mn TWIP steel investigated by in situ neutron diffraction and TEM

YF Shen, YD Wang, XP Liu, X Sun, RL Peng, SY Zhang… - Acta materialia, 2013 - Elsevier
The deformation mechanisms and associated microstructure changes during tensile loading
of an annealed twinning-induced plasticity steel with chemical composition Fe–20Mn–3Si …

Annealing parameters effect on microstructure evolution, tensile properties and deformation behaviors of direct-cold-rolled UNS S32101 duplex stainless steel with …

W Li, J Li, Q Gong, H Guo, Z Cao, W Mu - Materials Science and …, 2023 - Elsevier
Microstructure evolution, strain-induced martensite transformation (SIMT) kinetics, tensile
properties, deformation behaviors of UNS S32101 duplex stainless steel (DSS) with …

Lean duplex TRIP steel: Role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning

P Hou, Y Li, D Chae, Y Ren, K An, H Choo - Materialia, 2021 - Elsevier
Constitutive micromechanical behavior of transformation induced plasticity (TRIP) stainless
steel (SS) alloys was investigated using high-energy synchrotron x-ray diffraction (S-XRD) …