Physical vapor deposition technology for coated cutting tools: A review

Y Deng, W Chen, B Li, C Wang, T Kuang, Y Li - Ceramics International, 2020 - Elsevier
Due to various difficult-to-machine materials and increasingly severe machining conditions,
more and more attention has been paid to the physical vapor deposition (PVD) technology …

Recent developments in magnetron-sputtered silicon nitride coatings of improved mechanical and tribological properties for extreme situations

AU Rao, SK Tiwari, MS Goyat, AK Chawla - Journal of Materials Science, 2023 - Springer
Abstract Silicon nitride (Si3N4) coatings are well known for extreme conditions (engine
parts, turbine blades, etc.). Si3N4 coatings offer excellent mechanical and tribological …

Influence of deposition parameters on hard Cr–Al–N coatings deposited by multi-arc ion plating

L Wang, S Zhang, Z Chen, J Li, M Li - Applied Surface Science, 2012 - Elsevier
The Cr–Al–N coatings were synthesized at various substrate bias voltages and nitrogen
partial pressures by multi-arc ion plating (M-AIP). The relationships between deposition …

Microstructures, mechanical properties, and tribological behaviors of Cr–Al–N, Cr–Si–N, and Cr–Al–Si–N coatings by a hybrid coating system

IW Park, DS Kang, JJ Moore, SC Kwon, JJ Rha… - Surface and Coatings …, 2007 - Elsevier
Cr–Al–N, Cr–Si–N, Cr–Al–Si–N coatings were successfully deposited on WC–Co substrates
by a hybrid coating system combining an arc ion plating technique using Cr target, and a …

A superhard CrAlSiN superlattice coating deposited by multi-arc ion plating: I. Microstructure and mechanical properties

S Zhang, L Wang, Q Wang, M Li - Surface and Coatings Technology, 2013 - Elsevier
A superhard CrAlSiN superlattice coating was deposited by multi-arc ion plating (M-AIP).
The coating microstructure and mechanical properties were investigated by X-ray diffraction …

Multi-component nitride coatings derived from Ti–Al–Cr–Si–V target in RF magnetron sputter

CH Lin, JG Duh, JW Yeh - Surface and Coatings Technology, 2007 - Elsevier
The nitride coatings comprised of various constituents Ti, Al, Cr, Si, V were deposited on
mild steel by RF magnetron sputtering process. The Ti–Al–Cr–Si–V multi-component target …

Mechanical properties and oxidation behaviour of (Al, Cr) N and (Al, Cr, Si) N coatings for cutting tools deposited by HPPMS

K Bobzin, N Bagcivan, P Immich, S Bolz, R Cremer… - Thin Solid Films, 2008 - Elsevier
Hard coatings with high hardness, high oxidation resistance and thermal stability are used
for economical machining. In this regard nanostructured (Cr, Al) N and nc-(Cr, Al) N/a-Si3N4 …

Oxidation behavior of Si-doped nanocomposite CrAlSiN coatings

HW Chen, YC Chan, JW Lee, JG Duh - Surface and Coatings Technology, 2010 - Elsevier
Recently more and more hard coatings greatly emphasize the importance of oxidation
characteristics. This study attempts to dope Si into conventional CrAlN to form the CrAlSixN …

Formation of composite ternary nitride thin films by magnetron sputtering co-deposition

CS Sandu, R Sanjinés, M Benkahoul, F Medjani… - Surface and Coatings …, 2006 - Elsevier
Thin films of M–X–N (M stands for early transition metal and X= Si, Ge, Sn) are studied as
protective coatings. To extend the knowledge about the formation of nanocomposite films …

The effects of Cr and Si additions and deposition conditions on the structure and properties of the (Zr-Ti-Nb) N coatings

AD Pogrebnjak, AA Bagdasaryan, VM Beresnev… - Ceramics …, 2017 - Elsevier
Abstract In this study,(Zr-Ti-Nb) N,(Zr-Ti-Cr-Nb) N and (Zr-Ti-Cr-Nb-Si) N nitride coatings
were obtained using a well-developed vacuum arc deposition. The systematical …