High strength aluminum alloys are widely used but their strength is reduced as nano-
precipitates coarsen rapidly in medium and high temperatures, which greatly limits their …

It is well known that the addition of Sc and Ag to Al alloys can promote the nucleation of α-Al
grains and θ′-Al 2 Cu precipitates. In this study, the effects of Sc and Ag on grain size and …

The deformation behavior of {111} Al Ω plates has been analyzed in an Al-Cu-Mg-Ag alloy
after creep tests to fracture by atomic-resolution scanning transmission electron microscopy …

Abstract Quench-induced S (Al 2 CuMg) phases are generally formed in Al-Zn-Mg-Cu alloys.
The precipitation and relative crystallographic relationships of η-type (MgZn 2) precipitates …

We investigate the effect of accumulation of H atoms on θ'strengthening precipitates in Al-Cu
alloy. A relationship is established between the H accumulation and decrease in shear …

In order to develop high-strength Al-Cu-Mg-Ag alloys used in the aerospace, this paper
studied the mechanical properties and microstructure of Al-Cu-Mg-Ag alloys with T6I4 …

The effect of non-isothermal ageing (NIA), combined with two conventional T6 treatments on
the microstructure and mechanical properties of an Al–Cu–Mg–Ag alloy was investigated …

Good stress relaxation stability enables heat-resistant aluminum alloys to serve well at high
temperatures. From the viewpoint of simultaneous regulation of microstructure and …

Here, wire arc additive manufacturing (WAAM) is employed for the fabrication of Al-Cu-Mg-
Ag alloy, focusing on improving mechanical property via eliminating porosity and tuning …

Abstract Effect of deep cryogenic treatment (DCT) on the aging behavior and tensile
properties of Al–Cu–Mg–Ag alloy was investigated. Results show that DCT of Al–Cu–Mg–Ag …